840094500 Ev01 12/17/01 8:48 AM Page 5
To Vertical Steam
1.Unplug iron. Fill the Removable Reservoir according to directions. Replace Reservoir.
2.Plug iron into outlet.
3.Turn the Temperature Control Dial to highest setting.
4.Allow two minutes for the iron to reach desired temperature.
5.Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror.
6.Hold iron about 6 inches away from garment and
press and release the Blast Button to steam out wrinkles. Do not press the Blast Button more than once every 2 seconds.
7.To turn iron off, turn Temperature Control Dial to Off. Unplug iron.
8.Empty water from the iron following directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Optional Features (on selected models)
Adjustable Steam Switch – This switch
| provides minimum |
| steam for wool or |
| maximum steam |
| for linen. Set the |
| switch to O to |
| change to |
| Dry Iron. |
Spray and Blast of Steam Buttons – Push | |
Blast | Blast Button for an |
Spray extra blast of steam. | |
| Push Spray Button |
| to release a fine |
| spray of water for |
| difficult wrinkles in |
| cotton or linen. |
Automatic Shutoff Reset Button and Power
On Light – The
Automatic Shutoff
Reset Button light comes on when the iron is first plugged in. After one hour, the iron will shut off and the light will go out. Push
the Reset Button to turn iron back on.
The Power On Light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
5