GE 681131690614 Stand BY→ Rayon → Silk → Wool → Cotton → LINEN→STAND by, Flashing once. Then

Setting the temperature

•When pressing the Fabric Selector, the temperature setting will cycle in the

following sequence:

STAND BY→ RAYON → SILK → WOOL → COTTON → LINEN→STAND BY

Setting	Temp. Range	LCD display action
Full display at		Power lamp will light and
initial stage		the system resets with
		LCD background ON and
		flashing once. Then the
		buzzer beeps once and it
		goes to the stand by
		condition with the Sleep
		Indication Lamp flashing
		blue.
Stand by		Hold Button for 3 Seconds
condition		to turn to Stand by.
		Background lamp turns
		off; the LCD will read
		“STAND BY” and Sleep
		Indication Lamp will flash
		blue. Under this
		condition, the relay has
		no output. If pressing on
		setting button, the system
		now goes to the ready
		operation status.
RAYON	195 – 250ºF	Push button once: RAYON
		blinks until heat is
		reached and is ready to
		iron.
SILK	250-285ºF	Push button twice: SILK
		blinks until heat is
		reached and is ready to
		iron
WOOL	285-320ºF	Push button 3 times:
		WOOL blinks until heat is
		reached and is ready to
		iron
COTTON	320-355ºF	Push button 4 times:
		COTTON blinks until heat
		is reached and is ready to
		iron.
LINEN	355-410ºF	Push button 5 times:
		LINEN blinks until heat is
		reached and is ready to
		iron

6