Burst of Steam, Water Spray, Ironing Hints | Euro-Pro IR410 instruction

OPERATING INSTRUCTIONS (CONT.)

4.Turn the temperature dial to any of the temperatures within the gray steam band and allow the iron to heat for approximately 2 minutes before ironing. Place iron on its heel (on a stable, protected surface) while the iron is warming to desired temperature.

5.Slide the steam lever up to increase the amount of steam. When using extra steam, the iron uses more water and it may be necessary to fill the tank more often. See page 4.

For Steam Ironing:

Figure 3

6.Steam is produced as soon as the iron is held in the horizontal position. Steam will stop coming out when the iron is put on its heel in a vertical position or by turning the steam control dial to “0”.

BURST OF STEAM

WARNING! DO NOT aim iron at face, towards yourself, or anyone else while using or adjusting steam. Burns or serious injury may occur.

The burst-of-steam button is useful when ironing denim, cotton, and linens. It provides extra, sudden blasts of steam which aid in removing stubborn wrinkles.

The burst-of-steam feature can be used with Dry or Steam ironing as desired.

1.Make sure the water tank is at least 1/2 filled with water.

2.Set the temperature dial. Place the iron on the stand (on a stable, protected surface) and allow it to heat for approximately 2 minutes.

3.With the iron in a horizontal position, press the burst of steam button several times to prime the pump. See Figure 4.

Figure 4

NOTE: If the tank runs dry, remove the plug from wall outlet. Then, fill the iron with water and re-prime the pump. The iron may be filled with water while it is hot.

WATER SPRAY

The water spray is useful on fabrics with stubborn wrinkles. Press the spray button and a jet of water will spray onto the fabric being ironed. See Figure 5. The water spray can be used with dry or steam ironing as desired.

Figure 5

SELECTING IRON

TEMPERATURES

Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the “Ironing Chart” on page 10 for temperature recommendations:

•Use low settings for synthetics.

••Use moderate settings for wool, silks, and blends.

•••Use high settings for cottons and linens.

Temperature Control Dial

Figure 6

Variable Steam Control

Figure 7

NOTE: Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam.

IRONING HINTS

WARNING! To prevent fire, do not leave iron unattended while connected.

•Sort articles to be ironed according to the type of fabric. This will reduce the need to adjust the temperature for different types of garments.

•If you are not sure of the fiber content of a garment, test a small area such as a seam or inside hem section before ironing a visible area. Start with a low temperature setting and gradually increase to find the best setting.

•When reducing the temperature to iron sensitive fabrics, allow approximately 2 minutes for the iron to cool to the new temperature setting.

•Fabrics such as velour, wool, linen and silk are best ironed with an ironing cloth to prevent shine marks.

IR410 specifications

The Euro-Pro IR410 is a versatile and powerful infrared device that has garnered attention for its innovative features and advanced technologies. Designed to simplify and enhance the health and beauty experience at home, the IR410 integrates cutting-edge technology with user-friendly functionality.

One of the standout features of the Euro-Pro IR410 is its advanced infrared heating system. This technology allows for gentle heat therapy, which is beneficial for promoting blood circulation and easing muscle tension. The infrared heat is capable of penetrating deeper into the skin unlike traditional heating methods, providing relief and comfort during use. Whether for relaxation after a long day or targeting specific areas of discomfort, the IR410’s infrared capabilities stand out as a key characteristic.

The Euro-Pro IR410 is also designed with user convenience in mind. It features an intuitive control panel that allows users to easily adjust the temperature settings to their desired comfort level. This ensures a personalized experience tailored to individual needs, whether one is seeking a gentle warmth or a more intense heat treatment. Moreover, with its integrated timer function, users can set sessions to run for a predetermined duration, allowing them to relax without worrying about monitoring the device.

Another notable aspect of the Euro-Pro IR410 is its portability. The lightweight design makes it easy to transport, enabling users to enjoy the benefits of infrared therapy wherever they are. This feature aligns well with modern lifestyles, where convenience and efficiency are key.

In terms of construction, the Euro-Pro IR410 is built from high-quality materials that ensure durability and longevity. Its sleek design not only enhances its aesthetic appeal but also contributes to its functionality. The device is designed for easy cleaning, further promoting a hygienic user experience.

Safety is paramount, and the Euro-Pro IR410 comes equipped with multiple safety features, including automatic shut-off mechanisms that activate when the unit is left unattended for extended periods. This ensures peace of mind for users, allowing them to focus on relaxation without concern.

Overall, the Euro-Pro IR410 represents the perfect blend of modern technology and practical usability. With its advanced infrared heating system, user-friendly controls, portability, and safety features, this product is an excellent addition to any health and wellness routine. Whether you’re seeking muscle relief, improved circulation, or simply a comforting heat therapy session, the Euro-Pro IR410 is engineered to meet those needs effectively.