Important Safety Instructions

TROUBLESHOOTING

When using your iron, basic safety precautions should always be followed, including the following:

1.Read all instructions carefully.

2.Use iron only for its intended use.

3.To protect against risk of electrical shock, do not immerse the iron in water or other liquids. Always turn the iron to “OFF” before plugging in or unplugging from outlet.

4.Never yank cord to disconnect from outlet. Grasp plug and pull to disconnect.

5.Do not allow cord to touch hot surfaces. Let iron cool completely before putting away.

6.Always disconnect iron from electrical outlet when filling with water, emptying, or when not in use.

7.Do not operate iron with a damaged cord, or after the iron has been dropped or damaged in any manner. To avoid the risk of electric shock, do not disassemble the iron. Return the iron to EURO-PRO Operating LLC for examination and repair. Incorrect reassembly can cause the

risk of electric shock when the iron is used.

8.Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.

9.Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down; there may be hot water in the reservoir.

10.This appliance is for household use only.

11.Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.

SPECIAL INSTRUCTIONS

1.To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.

2.If an extension cord is absolutely necessary, use a 13-ampere cord. Cords rated for less amperage may overheat. Use care to arrange the cord so that it cannot be pulled or tripped over.

	PROBLEM	POSSIBLE REASONS & SOLUTIONS
		• Iron should be plugged into a 120V AC electrical
	Iron does not heat	outlet only.
		Make sure that the plug is securely in the socket.
		• Temperature setting too low.
		Turn to higher setting.

	Thermostat ready light	• This is normal.
	goes On and Off	The light goes On and Off as the thermostat is
		switching the heating element On and Off to
		maintain the selected temperature.

	Some odor or small	• This is normal.
	particles come out of	Follow instructions for first use and allow iron to steam
	steam vents of new	through 2-3 fillings & press the steam burst button
	iron	occasionally to eliminate small white particles.

	Iron does not steam	• Water tank may be empty or water level is very low.
	Iron does not steam	Add water.
		Add water.
		• Make sure that the temperature control dial and
		the variable steam control are correctly set. For
		maximum steam, (setting ‘Max’ on steam control),
		temperature control dial should be set on ‘•••’.
		• Adjustable steam control is set on “0”.
		Always allow the iron to reach the selected
		temperature with the adjustable steam control setting
		at ‘0’. Make sure the temperature control dial is set in
		the correct steam area, e.g. ‘•’, and the steam control is
		not on ‘0’. For more steam, turn temperature dial to
		higher setting, e.g. ‘•••’, and the steam control to ‘Max’.

POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do no attempt to defeat this safety feature.

SAVE THESE INSTRUCTIONS

For Household Use Only

1	Rev. 06/02A

		• If temperature setting and steam control setting are
		correct and there is no steam, gently tap the
		soleplate on the ironing board a few times. Move
		the variable steam control from ‘0’ to ‘Max’ a few
		times.
	Water droplets coming	• Iron may not be hot enough. Set thermostat to the
	Water droplets coming	‘Max’ position. Always allow iron sufficient time to
	from steam vents	‘Max’ position. Always allow iron sufficient time to
	from steam vents	heat up (thermostat light goes off) before activating
		heat up (thermostat light goes off) before activating
		the variable steam control.
		• Overuse of steam burst. Allow more time between
		each burst.
		• Iron may have been overfilled. Turn iron off,empty
		water and follow instructions for filling.
		• Steam performance may be low if iron requires
		seasoning. To season, use regular tap water for 1or 2
		tanks until steam performance improves.

IR412 specifications

The Euro-Pro IR412 is a cutting-edge steam iron designed to deliver exceptional performance and efficiency, making it a must-have appliance for those who prioritize a well-groomed wardrobe. This model features a sleek and ergonomic design that promotes comfortable handling, allowing users to glide effortlessly over garments.

One of the standout characteristics of the IR412 is its powerful steam output. With a steam output of up to 30 grams per minute, it effectively penetrates fabrics, reducing wrinkles and creases without damaging delicate materials. The vertical steam option is particularly innovative, enabling users to remove wrinkles from hanging garments and curtains, adding versatility to this appliance.

The IR412 incorporates advanced technologies that enhance its usability, including a non-stick soleplate. This feature ensures smooth gliding across various fabric types, minimizing the risk of sticking or snagging. Additionally, the soleplate is designed to distribute heat evenly, providing consistent results on every pass. The precision tip allows for detailed work around buttons, seams, and collars, ensuring a professional finish.

Another significant feature of the Euro-Pro IR412 is its generous water tank capacity, which reduces the need for frequent refills during ironing sessions. The tank is also designed for easy filling and cleaning, promoting convenience and maintaining the integrity of the appliance over time. The iron's anti-drip system prevents water from leaking, keeping garments dry and free from unsightly water spots.

Safety is a priority for the IR412, as it is equipped with an automatic shut-off feature that activates after a period of inactivity. This function provides peace of mind for users, ensuring that the iron does not pose a fire hazard.

The compact and lightweight design makes the Euro-Pro IR412 easy to maneuver and store, appealing to both casual users and ironing enthusiasts. With straightforward controls, including an adjustable temperature dial, it caters to a wide array of fabrics, from cotton and linen to synthetic blends.

In summary, the Euro-Pro IR412 steam iron stands out for its powerful steam output, non-stick soleplate, and user-friendly features. Its ability to tackle stubborn wrinkles efficiently, combined with safety features and portability, makes it an essential tool for maintaining a polished appearance in any wardrobe.