Features of Shark CORDED/CORDLESS Iron

OPERATING INSTRUCTIONS (cont.)

SELECTING IRON

TEMPERATURES

Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the “Ironing Chart” on page 10 for temperature recommendations:

•Use low settings for synthetics.

••Use moderate settings for wool, silks, and blends.

•••Use high settings for cottons and linens.

Temperature Control Dial

IRONING HINTS

WARNING! To prevent fire, do not leave iron unattended while connected.

• Sort articles to be ironed according

to the type of fabric. This will reduce

the need to adjust the temperature

for different types of garments.

• If you are not sure of the fiber

content of a garment, test a small

area such as a seam or inside hem

section before ironing a visible area.

Start with a low temperature setting

and gradually increase to find the

best setting.

• When reducing the temperature to

iron sensitive fabrics, allow

approximately 2 minutes for the iron

to cool to the new temperature

setting.

4.TEMPERATURE DIAL

Turn dial to select temperature. Main temperature settings are indicated by the 1, 2 and 3 dots. (See “Ironing Chart.”)

Figure 6

Variable Steam Control

• Fabrics such as velour, wool, linen

and silk are best ironed with an

ironing cloth to prevent shine marks.

1.	BLAST OF STEAM BUTTON
	Pressing this Button provides a
	powerful blast of steam without
	dripping water.
2.	ATOMIZER SPRAY
	BUTTON
	Pressing this Button provides a
	defined jet of spray which gently
	moistens fabric.

5.WATER FILLING INLET

The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing.

Figure 7

NOTE: Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam.

3. VARIABLE STEAM

CONTROL

For selecting dry ironing, slide lever

down. For steam ironing, gradually

slide lever up to increase the

amount of steam.

Red Light

6.AUTO SHUT-OFF

The electronic auto-off switches the iron off if it has been standing unmoved for approximately 8 minutes. A red light will flash when the iron switches itself off. To switch the iron back on again,shake the iron.