How to Use, Fabric guide, To Fill the Water Tank

Product may vary slightly from what is illustrated.

	
	 
		Symbols


How to Use

This appliance is for household use only.

Getting Started

Remove any labels, stickers or tags attached to the body or soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a water softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

TO FILL THE WATER TANK

	Dry
	
	
	Steam
	
	Spray
	
	
	

1.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (A). Do not overfill. Refill as needed.

2.Plug in the iron. Temperature-ready light glows when iron has reached set temperature setting.

Tip: If unsure of a garment’s fabric, test a small area (on an inside seam or hem) before ironing.

FOR STEAM IRONING

1. Move the dry/steam selector to the desired steam level (B).

1.	Spray nozzle	7.	Temperature-ready light
2.	Water-fill opening	8.	Heel rest
3.	Dry/steam selector	9.	Fabric guide
4.	Steam button	10.	Water tank
5.	Spray button	11.	Fabric-select dial
6.	Pivoting cord	12.	Nonstick soleplate

Fabric guide

2. Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (C). See fabric guide on the heel rest and read garment’s label to help you determine fabric type. The temperature-ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing.

C	3. When finished ironing, turn the fabric-select dial to lowest heat
	setting, move the selector to	and unplug the iron. Stand the

iron on its heel rest and allow it to cool off.

Important: Always stand the iron on its heel rest when powered on but not in use.

Surge of Steam

Use to remove stubborn creases.

1.With water tank filled to the MAX mark, turn the fabric-select dial to at least setting 4 and wait for the temperature-ready light to go off.