ENGLISH
Mounting this Unit
Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw holes (M5 screws) to mount.
Ceiling
Bottom Surface
4 locations
Air inlets
Precautions for Mounting
zSpecial expertise and techniques are required for | zRegardless whether the unit is still under guarantee, JVC |
mounting this unit. Be sure to ask your dealer or a | is not liable for any product damage caused by mounting |
specialist to perform mounting. | the unit with |
zDepth of the screw holes (screw length) is 30 mm. Use | environment is not suitable for |
screws shorter than 30 mm but longer than 19 mm. | zWhen using the unit hanging from a ceiling, pay attention |
zWhen mounting to a pedestal, ensure sufficient space | to the surrounding temperature. When a heater is in use, |
(foot height of 21.5 mm or higher) around the unit so that | temperature around the ceiling is higher than expected. |
the air inlets are not blocked. |
|
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
47
Downloaded from www.Manualslib.com manuals search engine