English
Our products are engineered to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun steam iron. Notice: Remove the label, if any, from the sole plate before first use.
Important Safeguards
•Before using the iron, read the use instruc- tions completely. Keep the use instructions during the entire life of the iron.
•Make sure your voltage corresponds to the voltage printed on the iron. Connect the iron to alternating current only.
•Always unplug the iron before filling with water. Always pull the plug, not the cord. The cord should never come in contact with the hot objects or the sole plate.
•Never immerse the iron in water or other liquids.
•During ironing pauses, always place the iron upright on its heel rest. Unplug it when leaving the room, even if only for a short time.
•Keep the iron away from children. Electric irons combine high temperatures and hot steam that could lead to burns.
•Never iron or dampen clothes while wearing them.
•Check the cord regularly for possible damage.
•If the appliance (including cord) shows any defect, stop using it and take it to a Braun Service Centre for repair.
•Faulty or unqualified repair work many cause accidents or injury to the user.
•Braun electric appliances meet applicable safety standards.
A Description
1Water tank opening
2Spray nozzle
3Power shot button
4Spray button
5Steam regulator
6Steam plus button (model 3240 only)
7Pilot light
8Temperature selector
B Before starting off
•This iron is designed for tap water. If you have extremely hard water, we recommend to use a mixtur of 50 % tap water and 50 % distilled water. Fill the water tank to «max» marking.
Never use distilled water exclusively. Do not add any additives (e.g. starch).
•Keep the iron in the upright position and connect it to the mains. Select the tempera- ture according to the ironing guide on the heel rest of the iron or on the label in your garments.
•The pilot light goes off when the desired temperature is reached (after approx.
1 ó min.).
C Ironing
Vario steam
You can increase and reduce the quantity of steam by turning the steam regulator. The steam regulator and the temperature selector have to be set within the red range.
Notice: While ironing, do not turn the steam regulator beyond the red range. For power shot and vario plus steam, the temperature selector must be set within the continuous red range.
These functions can even be activated when dry ironing.
We recommend a medium steam setting for all normal ironing. Only when ironing linen, thick cotton or similar fabrics we recommend the maximum steam setting.
Vario plus (model 3240 only)
Press the steam plus button (6) for max.
3 seconds, but not more often than 4 times per minute.
Power shot
Press the power shot button (3) in intervals of at least 5 seconds.
Spray function
Press the spray button (4).
Dry ironing
Set the steam regulator (5) on position «0» (= steam off).
Notice: Prior to ironing, press the power shot button 3 to 4 times to activate them. This function can be used for steaming hanging clothes.
D After ironing
Unplug the iron. To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest.
E Maintenance and cleaning
To clean the sole plate, use steel wool. Never use a scouring pad, vinegar or other chemicals.
F Cleaning the anticalc valve
The anticalc valve on the steam regulator has to be decalcified regularly (e.g. when- ever steam development is insufficient).
For this, the water tank has to be empty.