•If you want to put the appliance down during use, fold out the stands 9 to the front and place the appliance on them. When you are ready to reu- se the appliance, simply fold the stands 9 back to the rear.
After using the steam brush
•Place the temperature regulator 3 at the position "MIN".
•After use, ALWAYS remove the plug 7 from the power socket.
•Pour away any water remaining in the water tank 1 to do this, open, the water fill opening 2 of the water tank 1, turn the appliance upsi- de down and lightly swivel it.
Cleaning and care
Risk of personal injury!
ALWAYS remove the plug 7 before cleaning the appliance.
There is a risk of electric shock! Allow the appliance to cool down. Risk of Burns!
CAUTION!
Never use aggressive cleansers. These can damage the surfaces.
•Clean the housing with a soft, dry cloth only.
•Clean the metal components with a lightly water- moistened cloth and a mild,
Scale removal
Should the steam output diminish over a period of time, decalcify the steam brush.
•For decalcification use a standard commercial descaling agent based on citric acid. Proceed as detailed in the product instructions.
Storage
Attention!
Remove the plug 7 from the power socket and allow the appliance to cool down before putting it into storage.
Risk of fire!
Store the appliance at a dry location. You can also hang the appliance up by the suspension eye 6.
Troubleshooting
The steam brush ejects no or very little steam:
The supply of water in the steam brush is exhausted. Fill the water tank 1 with water (See "Filling with water").
The steam brush does not heat itself up:
The appliance is not connected to mains power. Insert the plug 7 into a wall power socket and set the desired temperature with the temperature regulator 3.
The steam brush is defective. Arrange for the ap- pliance to be repaired by a qualified specialist.
The power socket is defective. Try another wall socket.
- 7 -