Tricity Bendix BIW 85 Operating Sequence, Load the laundry, Measure out the detergent

Page 8

Operating Sequence

Before your first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 4.5 KG OF WHITE COTTON AT 90°C Suppose you have 4.5 kg of heavily soiled laundry to wash. It is white cotton and is suitable for high temperature washing

1. Load the laundry

Open the door.

Place the laundry in the drum, one item at a time, shaking out as much as possible. Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment .

If you wish to carry out a prewash(*), pour detergent into the compartment marked

(*) Prewash is available in programme “1”.

3.Add the fabric softener (if required)

If required, pour fabric softener into the compartment

marked (the amount used must not exceed the «MAX» mark in the drawer).

Close the drawer gently

AL025

AL023

4. Select the required option(S)

Depress HALF LOAD button and/or ECO WASH if required.

8

Image 8
Contents BIW Page During Use InstallationChild Safety Contents Interest of the environment Your New Washing MachineEcological hints Description of the Appliance Detergent dispenser drawerControl Panel Detergent dispenser drawer Half Load buttonMains-on light ECO Wash buttonOperating Sequence Load the laundryMeasure out the detergent Add the fabric softener if requiredStart the machine At the end of the programmeLoad the laundry Machine stops automatically and the mains-on light goes out SpinWashing Hints 1000g = 1 kgWhich detergent to use? How much detergent and fabric softener? Using a water softening agentWhich form? Wash Care Symbols Important NotesWashing Programmes Wash programmeProgramme dial Description MaxProgrammes for synthetics, delicates and wool SyntheticsMaintenance and Cleaning Water inlet filters Cleaning the filterWater drain filter Something Not Working Customer care Service & Spare PartsSymptom Possible causes Guarantee Conditions Bendix standard guarantee conditionsEuropean guarantee This guarantee does not coverChannel Islands Midlands Installation Instructions Technical SpecificationsUnpacking Positioning Water inletWater drainage Levelling Special conditionsEnsure that the cut off plug is disposed of safely Electrical connectionsPermanent connection Page Consumer care telephone number 08705 950