Tricity Bendix CWD 1010, WDR 1020 installation instructions Something Not Working

Page 22

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Tricity Bendix Service Force Centre, please carry out the checks listed below.

Symptom

Possible causes

 

 

 

The machine does not start

The door has not been closed.

 

The plug is not properly inserted in the power socket.

 

There is no current at the socket

 

The main fuse or the fuse in the plug has blown.

 

The selector dial is not correctly positioned.

 

The ON/OFF button has not been depressed.

 

 

 

The machine does not fill

Ensure the water taps are open.

 

The filters in the inlet hoses are blocked.

 

The inlet hoses may be squashed or kinked.

 

The door has not been closed.

 

 

 

The machine fills then empties

The end of the drain hose is too low.

immediately

The end of the drain hose is submerged in water.

 

There is no vent in the end of the drain hose.

 

 

 

The machine does not empty and/or

The drain hose may be squashed or kinked.

does not spin

The RINSE HOLD option has been selected.

 

The drain filter may be blocked.

 

The drain hose extension is not correct. Follow the instructions for

 

 

connecting to the waste.

 

The drainage system pipes are blocked.

 

 

 

There is water on the floor

Too much detergent or unsuitable detergent has been used (creates too

 

 

much foam).

 

Check whether there are any leaks from one of the inlet hose(s) fittings.

 

 

It is not always easy to see this as the water runs down the hose; check

 

 

to see if it is damp.

 

The drain hose may be damaged or not securely positioned.

 

The detergent dispenser drawer or recess is clogged.

 

The drainage system pipes are blocked.

 

 

 

Unsatisfactory washing results

Too little detergent or unsuitable detergent has been used. An

 

 

insufficient amount of detergent leaves the laundry looking grey and

 

 

causes lime scale to form.

 

Stubborn stains have not been treated prior to washing

 

The correct wash programme has not been selected.

 

Too much laundry has been placed in the drum.

 

 

 

The machine vibrates when spinning

The internal packing has not been removed.

 

The machine is in contact with the wall or furniture.

 

The machine is not level.

 

The washing load is badly distributed in the drum.

 

Maybe there is very little laundry in the drum.

 

 

 

22

Image 22
Contents WDR 1020 CWD Ecological hints Your New Washer-DryerInterest Environment Istallation Child SafetyUse Contents Description of the Appliance Detergent dispenser drawerControl Panel Drying time selector dial Programme selector dialMeasure out the detergent Operating SequenceLoad the laundry Measure out the fabric softenerStart the machine At the end of the programmeSelect the required option Washing 2 KG of Mixed Fabrics AT 50CTurn the programme selector dial clockwise to programme Select the required time Select the programmeDrying 2.25 KG of Cotton At the end of the programme Autodrying 1 KG of Mixed Fabrics Load Programme Fabric typeProgramme Fabric type Max. load Drying timeWashing and Drying Hints 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesMaintenance and Cleaning Cleaning the filter Water drain filterSomething Not Working Noise Door will not openMachine makes an unusual Machine does not dry or doesEuropean guarantee Guarantee ConditionsStandard guarantee conditions This guarantee does not coverPage Page Washing Installation InstructionsTechnical Specifications DryingUnpacking PositioningWater inlet Water drainageSpecial conditions LevellingInterest of the environment Electrical connection Permanent connectionConsumer care telephone number