Tricity Bendix BIW 123 W installation instructions Water inlet, Water drainage

Page 24

Water inlet

The inlets on the back of the appliance are colour coded, blue for cold and red for hot.

Connect the hoses to a tap with a 3/4” thread.

P1088

If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece.

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or a booster pump. A minimum water pressure of 0.48 bar is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.

There should be a minimum distance of 5.02m

(16.5 ft) between the appliance’s inlet and the bottom of the water storage tank.

There will be sufficient pressure for the hot water supply, providing there is a minimun height of 2.74 metres (9 ft) between the bottom of the cold water storage tank and the bottom of the hot water cylinder.

Set the hoses correctly by loosening the ring nuts. After positioning the inlet hoses, be sure to tighten the ring nuts again to prevent leaks.

P0021

Water drainage

This appliance is designed to be permanently plumbed into your home's water supply and drainage system.

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied.

(12")cm

30

P1074

The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.

 

38 mm.(1/2") diameter

cm.(12")30Min.

1

standpipe

P1040

When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram).

Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water.

3 pin

 

Max. 90 cm. (35.4")

Min.60 cm. (23.6")

P1130

 

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents BIW 123 W Installation Child SafetyUse Contents Your New Washing Machine Ecological hintsInterest Environment Description of the Appliance Detergent dispenser drawerControl Panel Operating Sequence Start the machine At the end of the programmeWashing 2 KG of Mixed Fabrics AT 50C At the end of the programme Washing Hints Which detergent? Which form?Wash Care Symbols Important NotesWashing Programmes Programmes for cotton and linenProgrammes for synthetics, mixed fabrics, wool and delicates Maintenance and Cleaning Cleaning the water inlet filters Emergency emptying outPage Symptom Possible causes Something Not WorkingService & Spare Parts 0870 5Customer Care Guarantee Conditions Standard guarantee conditionsEuropean guarantee ExclusionsInstallation Instructions Technical SpecificationsInstallation on a Suspended Floor UnpackingPositioning Water inlet Water drainageLevelling Special conditionsInterest of the environment Electrical connection Permanent connectionConsumer care telephone number 08705

BIW 123 W specifications

The Tricity Bendix BIW 123 W is a refrigerator that stands out for its efficient design and advanced features, making it an ideal choice for any modern kitchen. This model blends functionality with style, offering a seamless integration into your home décor.

One of the main features of the BIW 123 W is its impressive storage capacity. The refrigerator accommodates a variety of foods and beverages, thanks to its adjustable shelves and compartments. The spacious interior is designed to keep your groceries organized, with dedicated areas for fruits, vegetables, and perishables.

Energy efficiency is a significant consideration for the BIW 123 W, which has been rated highly in terms of energy consumption. This appliance utilizes advanced cooling technologies that minimize energy usage while maintaining optimal temperature levels for food preservation. The low-energy operation not only benefits the environment but also helps save on electricity bills.

Another key aspect of the Tricity Bendix BIW 123 W is its user-friendly interface. The refrigerator features a straightforward control panel that allows users to adjust temperatures and settings with ease. Additionally, the appliance is equipped with an audible alarm system that alerts you if the door is left open, ensuring that your food remains fresh and secure.

The design of the BIW 123 W is sleek and modern, featuring a white finish that fits seamlessly into any kitchen aesthetic. Its compact size makes it suitable for smaller spaces while still offering ample storage. Moreover, the appliance includes a reversible door, providing versatility in placement according to your kitchen layout.

The cooling system of the BIW 123 W employs a frost-free feature, which prevents ice build-up and reduces the need for manual defrosting. This not only saves time and effort but also maintains the efficiency of the refrigerator over time.

In conclusion, the Tricity Bendix BIW 123 W combines elegance, functionality, and eco-friendliness into one appliance. Its spacious interior, energy efficiency, user-friendly features, and stylish design make it a top choice for anyone looking for a reliable refrigerator in their home. Whether you are an avid cook or simply need a place to store your daily groceries, the BIW 123 W delivers on all fronts.
Top Page Image Contents