35.292.972….AW1260.qxd 06/05/2005 17:45 Página 8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment 
of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 90°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 90°C
Suppose you have 5 kg of heavy soiled laundry to wash. It is white cotton and is suitable for high temperature washing.
1. Load the laundry
Open the door by carefully pulling the door handle outwards.
Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
2.Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it into the main wash compartment 
and, if you wish to carry out the prewash phase, pour it into the compartment marked 
if you have selected the “prewash” option.
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
3. Select the required programme
Turn the programme selector dial to the programme 1. The light Start/Pause starts to flash. The pilot lights corresponding to the various phases making up the programme come on.
4.Select "SPIN REDUCTION" or "NO SPIN" option.
Press the option button repeatedly, to select the desired option. The relevant light illuminates
5. Select the required option
Select “prewash” or “rinse hold” option if required, the corresponding light illuminates.
C0064 |
C0065 |
8