Tricity Bendix BIW 145, BIW 125 W Levelling, Special conditions, Interest of the environment

Page 25

2. Onto a sink outlet spigot.

If the outlet spigot has not been used before, remove any blanking plug that may be in place.

P1197

Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine.

Loop

P1198

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre.

The joining piece must have an internal diameter of 18mm.

Important

Before connecting the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Levelling

Level the washing machine by raising or lowering the feet.

The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable.

P1051

Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation.

Some vibration is inevitable, especially if mounted on a wooden floor.

Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor.

Special conditions

If the floor is carpeted or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine.

Warning

The machine should NOT be placed on deep pile carpeting.

Note

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

In the interest of the environment

Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.

It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

25

Image 25
Contents BIW 125 W BIW 145 W Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest Environment Detergent dispenser drawer Description of the AppliancePrewash Main wash Fabric softener Control Panel Programme selector dial Programme progress displayProgramme information Load the laundry Operating SequenceSelect the required programme Select Spin Reduction or no Spin optionStart the programme Cancelling a programmeAltering an option or a running programme Interrupting a programmeMeasure out the fabric softener Measure out the detergentSelectSPIN Reduction or no Spin option At the end Programme 1000g = 1 kg Washing HintsWhich form? Which detergent?Important Notes Wash Care SymbolsWashing Programmes Washing symbol Type of laundryOptions Load Time Mins 60 50 Maintenance and Cleaning Emergency emptying out Cleaning the water inlet filterSomething Not Working 0870 5 Service & Spare PartsStandard guarantee conditions Guarantee ConditionsEuropean guarantee Customer Care DepartmentTechnical Specifications Installation InstructionsInstall the machine on a flat hard floor Installation on a Suspended FloorUnpacking PositioningWater drainage Water inletAppliance must be connected to a cold water supply Into a drainage standpipeSpecial conditions LevellingInterest of the environment Onto a sink outlet spigotPermanent connection Electrical connectionBlue- Neutral Brown- Live Page Consumer care telephone number 08705 950