The Control Panel
1Programme guide
2RINSE HOLD button
Press this button to make the machine stop with water in the drum after the wash cycle. This prevents any creasing which may take place if the clothes are left damp in the drum. When it is convenient for you to empty the machine, simply press this button again so that the machine can proceed to drain and short spin, or turn the dial to the drain programme “14”. If this button is not activated, the washing programmes will end with a short spin.
3 HALF LOAD button
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.25 kg).
4 On/Off button 
By depressing this button the machine starts operating. When depressed again, the machine stops.
5 Mains-on light
This light illuminates when the machine starts working and goes out when the machine is switched off.
6 Programme selector dial
To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program (reference mark on the control panel). If at any chance you pass by the required number NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required number is reached again.
Before setting the dial to any position ensure that the machine is switched off.
6