Tricity Bendix BIW 126 W installation instructions Control Panel

Page 6

The Control Panel

WHITES

95°

1

DELICATES

30°

9

WHITES economy

60°

2

WOOL

30°

10

FAST COLOURS

60°

3

COLD WASH

 

11

NON FAST COLOURS

40°

4

Mini Program

 

12

SYNTHETICS

60°

5

Rinses

 

13

SYNTHETICS

50°

6

Drain

 

14

SYNTHETICS

40°

7

Spin

 

15

DELICATES

40°

8

 

 

 

spin reduction

no spin

prewash half

rinse

start

load

hold

pause

6kg load ELECTRONIC 1200

 

PROGRAMME

 

 

15

 

1

 

 

14

 

 

2

wash

13

 

 

3

 

 

 

 

rinses

 

 

 

 

spin

12

 

 

4

 

 

 

 

end

11

 

 

5

 

 

 

door

10

 

 

6

 

 

 

 

9

8

7

BIW 126 W

1

2

3

4

5

6

7

8

1 Detergent dispenser drawer

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the “start pause” button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

If an incorrect option is selected, the corresponding pilot light flashes for about 2 seconds.

2 Spin button

By depressing this button you can reduce the final and the intermediate spin speeds or select the “no spin” option:

“spin reduction”: by selecting this option the speed will be reduced as follows:

Cotton: from 1200 to 600 r.p.m.

Synthetics and wool: from 900 to 450 r.p.m.

Delicates: from 700 to 450 r.p.m.

“no spin”: by selecting this option all the spinning phases are suppressed. To be used for extremely delicate items.

The machine will add 3 rinses on cotton programmes and 1 rinse on synthetic programmes.

4 Half Load button

Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 3 kg).

The machine will perform 2 rinses instead of 3.

5 Rinse Hold button

When selecting this option the water of the last rinse is not emptied out, to prevent the fabrics from creasing. At the end of the programme the pilot lights “door” and “end” illuminate. To drain water, proceed as follows:

turn the programme selector dial to position “O”;

select programme 14 (drain) or 15 (spin). In this case reduce the spin speed by means of the relevant button to adapt it to the fabrics to be spun.

press “start pause” button.

6 Start Pause button

After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.

To interrupt a programme which is running, depress the “start pause” button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was

interrupted, press the “start pause” button again.

3 Prewash button

Select this option if you wish your laundry to be prewashed before the main wash (not available for wool).

The prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

7 Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

6

Image 6
Contents BIW 126 W Installation Child SafetyUse Contents Your New Washing Machine Ecological hintsChild safety feature Description of the ApplianceDetergent dispenser drawer Control Panel Programme selector dial Programme informationLoad the laundry Operating SequenceSelect the required programme Select spin reduction or no spin optionAltering a programme Cancelling a programmeStart the programme Interrupting a programmeMeasure out the detergent Measure out the fabric softenerAt the end of the programme Washing Hints 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesWashing symbol Type of laundry Washing ProgrammesOptions FabricsMaintenance and Cleaning Cleaning the water inlet filter Emergency emptying outSomething Not Working Service & Spare Parts 0870 5European guarantee Guarantee ConditionsStandard guarantee conditions Customer CareInstallation Instructions Technical SpecificationsInstallation on a Suspended Floor UnpackingPositioning Water inlet Water drainageAppliance must be connected to a cold water supply Levelling Special conditionsInterest of the environment Electrical connection Permanent connectionConsumer care telephone number 08705