Water inlet, Water drainage | Tricity Bendix BWD 1011 specs

Water inlet

The inlets on the back of the appliance are colour coded, blue for cold and red for hot.

If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece.

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be given a separate cold water supply and not be connected to a mixer tap, a single outlet water heater or a booster pump. A minimum water pressure of 0.48 bar is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.

There should be a minimum distance of 5.02m

(16 1/2 ft) between the appliance’s inlet and the bottom of the water storage tank.

There will be sufficient pressure for the hot water supply, providing there is a minimun height of 2.74 metres (9 ft) between the bottom of the cold water storage tank and the bottom of the hot water cylinder.

Set the hoses correctly by loosening the ring nuts. After positioning the inlet hoses, be sure to tighten the ring nuts again to prevent leaks.

Water drainage

This appliance is designed to be permanently plumbed into your home's water supply and drainage system.

P1088

P0021

The appliance drain hose should hook into a standpipe with an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.

When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram).

Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water.

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre.

The joining piece must have an internal diameter of 18mm.

3 pin
90 cm.(35.4")	cm.
Max.	Min.60 (23.6")
P1039

cm.(12")	standpipe
	38 mm.(1/2") diameter
Min. 30

P1040

BWD 1011 specifications

The Tricity Bendix BWD 1011 is a stylish and functional washing machine that aims to meet the needs of modern households. With a focus on efficiency, reliability, and user-friendly features, this model is designed to make laundry days simpler and more effective.

One of the standout features of the BWD 1011 is its impressive load capacity. With the ability to hold up to 5 kg of laundry, it caters to small to medium-sized families or individuals. This capacity ensures that users can wash a decent amount of clothes in one go, ultimately saving time and energy. Moreover, the machine’s compact design allows it to fit comfortably in smaller spaces, making it an ideal choice for apartments or homes where space is limited.

In terms of performance, the BWD 1011 is equipped with a range of wash programs tailored to different fabric types and levels of dirtiness. Users can select from various settings such as cotton, synthetic, delicate, and quick wash, allowing for versatile laundry care. The machine also incorporates a 1200 RPM spin speed, which effectively removes excess water from clothes, reducing drying time and enhancing overall efficiency.

The technology behind the BWD 1011 ensures quiet operation during both the washing and spinning cycles. This feature is particularly appealing for those living in close quarters with neighbors or who run household activities during early mornings or late evenings. The machine operates with minimal vibrations and noise, making it conducive for various home settings.

Energy efficiency is another key characteristic of the Tricity Bendix BWD 1011. It adheres to stringent energy ratings, helping users save on electricity bills while minimizing their environmental impact. This model exemplifies a commitment to sustainable living by combining performance with eco-friendliness.

User convenience is further highlighted by the machine's intuitive control panel. The easy-to-read display and straightforward buttons allow users of all ages to operate it without hassle. Furthermore, the delay start feature enables users to set the washing process to commence at a later time, thereby enhancing flexibility in day-to-day laundry routines.

Overall, the Tricity Bendix BWD 1011 stands out for its combination of capacity, performance, energy efficiency, and user-friendly technology, making it a reliable addition to any home looking for an efficient laundry solution.