Operating Sequence

Before the first wash, we recommend that you run a cotton cycle at 60¡C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 4.5 KG OF WHITE COTTON AT 90¡C

Suppose you have 4.5 kg of normally soiled laundry to wash. It is white cotton and is suitable for high temperature washing.

1. Load the laundry

Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

P0004

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked (the amount used must not exceed the MAX mark in the drawer).

Close the drawer gently.

C0071

4. Select the required option

Depress RINSE HOLD button or HALF LOAD if required .

5. Select the required programme

Turn the programme selector dial clockwise until the marker on the top coincides with the programme 2 or 1 (if you wish to perform a prewash).

2. Measure out the detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent required and pour it into the main wash compartment .

If you wish to carry out the prewash, pour detergent into the compartment marked .

C0070