Shark HPB-2011, HPB-3520, HPB-4020, HPB-3530 manual Fuel Pressure Adjustment, Air Adjustment

Page 20

WASHER

MAINTENANCE

OPERATOR’S MANUAL PRESSURE

20

functions properly. This can be done by operating the machine and checking to see that when the trigger on the spray gun is in the off position, the burner is not firing.

Fuel Pressure Adjustment:

To adjust fuel pressure, turn the adjusting screw with a standard screwdriver (located on the fuel pump) clock- wise to increase, counterclockwise to decrease. Do not exceed 200 PSI.

Air Adjustment

Machines are preset and performance tested at the factory — elevation 100' above sea level. A one time correction for your location will pay off in economy, per- formance and extended service life. If a smoky or eye- burning exhaust is being emitted from the stack, two things should be checked.

First, check the fuel to be certain that kerosene or No. 1 home heating fuel is being used.

Next, check the air adjustment on the burner. An oily, black, smoky fire indicates a lack of air and the air band should be moved to allow the air to flow through the burner. Sharp, eye-burning white fumes indicate too much air flowing through the combustion chamber. The air band should be moved to allow less air to flow through the burner.

To adjust: start machine and turn burner ON. Loosen the two locking screws found in the air shutter openings (refer to illustrations) and close air shutter until black smoke appears from burner exhaust vent. Note air band position. Next, slowly open the air shutter until white smoke just starts to appear.Turn air shutter halfway back to the black smoke position previously noted.Tighten lock- ing screws.

If the desired position cannot be obtained using only the air shutter, lock the air shutter in as close a position as can be obtained, then repeat the above procedure on the air band setting.

FUEL AIR ADJUSTMENT: WAYNE

Air Band

Pressure

Gauge Port

Air Band

Pressure

Adjustment

Adjustment

Screw

Screw

 

 

Fuel Pump

FUEL AIR ADJUSTMENT: BECKETT

Air Band

Transformer

Fuel

Pump

Air Band

Adjustment

ScrewPressure

Gauge Port

Pressure

Adjustment Screw

97-6068, 97-6131 • REV. 3/06

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Model HPB Machine Specifications Contents Owner/User Responsibility Introduction & Important Safety InformationImportant Safety Information Use this product only in a well ventilated area Component Identification Mini Series GfciComponent Identification Junior Series Component Identification Senior Series Assembly Instructions Pressure WasherInstallation Operating Instructions Trigger Variable Pressure Control HandleCleaning Tips Detergents & General Operating TechniquesRinsing Thermal PumpShutting Down and CLEAN-UP After Extended StorageTroubleshooting LightProblem Possible Cause Solution LOW Water Problem Possible Cause Solution LOW Operating Maintenance Charts OIL Change RecordPreventative Maintenance Maintenance and ServiceMaintenance Fuel Pressure Adjustment Air AdjustmentExploded View 79 8 For Detail See Control Panel Illus View A-A See ViewExploded View 2011 Parts List Description QTY35-156 Exploded View 2015 2015, 3520 Parts List OPERATOR’S Manual Pressure Washer Exploded View 3530 3530, 4020 Parts List 1044 Plug, 1/8 Countersunk 0108 Control Panel Parts List Control Panel2015, 3520 Control Panel Parts List Item Part no Description QTY3520 051532 Strain Relief w/Gasket 2015 11-0305 3530, 4020 Control Panel Parts List Delay Option, Auto Start/Stop 036880 Float Tank Option 3530 3530, 4020 Float Tank Option Parts List QTY 3530, 4020 Series Steam Options & Parts ListsQTY 2015, 3520 Series Auto START/STOP Options 2015, 3520 Parts List Auto START/STOP Options 2015Auto START/STOP Options 3530, 4020 Parts List Auto START/STOP Options 3530Auto START/STOP Steam Options 2015, 3520 Parts List Auto START/STOP Steam Options 2015Auto START/STOP Steam Options 3530, 4020 Parts List Auto START/STOP Steam Options 3530Hose & Spray GUN Assembly Hose & Spray GUN Assembly Parts ListSpecifications Parts Specifications Motor Controls #5-3329 6.6 GPM@3500 PSI #5-3330 6.6 GPM@3500 PSI VBA35 Unloader Exploded View Parts ListVBA35 Unloader Exploded View VB55 Unloader Exploded View Parts List VB55 Unloader Exploded ViewAPR.S 2300 Unloader Valve Exploded View & Parts List POS QTY DescriptionWMH-F Pump Exploded View KITPump Exploded View Parts List Pump Exploded ViewFlange Screw Pump Exploded View and Parts List 70-261216 70-261210 70-261217 70-260007 70-260027 Page Shark Limited NEW Product Warranty Pressure Washers

HPB-3530, HPB-2011, HPB-4020, HPB-3520 specifications

Shark has established itself as a leader in the vacuum cleaner market with an array of innovative products, including the Shark HPB series. Among the standouts in this lineup are the HPB-3520, HPB-4020, HPB-2011, and HPB-3530 models. Each of these vacuums features unique characteristics and advanced technologies designed to enhance cleaning efficiency and user experience.

The Shark HPB-3520 is known for its powerful suction capabilities, making it a top choice for families with pets. Its self-cleaning brush roll actively removes hair while you clean, ensuring that tangles and clogs are minimized. The lightweight design enhances maneuverability, allowing users to clean corners and crevices with ease. The model also boasts a HEPA filtration system, which captures allergens and dust particles, making it ideal for allergy sufferers.

The HPB-4020 takes cleaning to the next level with its advanced DuoClean technology, featuring two brush rolls that work in unison to pick up debris on both carpets and hard floors. This versatility makes it a great choice for households with mixed flooring. The vacuum also offers a detachable canister for portable cleaning, allowing users to tackle above-floor areas like upholstery and stairs effortlessly.

For those seeking a budget-friendly option without compromising on performance, the Shark HPB-2011 is an excellent choice. It delivers robust suction power and comes equipped with a washable foam filter, which reduces ongoing maintenance costs. Its compact design makes it easy to store, while its durable build ensures longevity, making it perfect for small spaces and occasional deep cleaning.

Lastly, the Shark HPB-3530 offers a combination of features from its siblings. With a multi-surface capability, this model excels at transitioning from carpets to hard floors without losing efficiency. Its lightweight frame and swivel steering enhance control, while the anti-allergen complete seal technology ensures that the dust collected remains trapped inside the vacuum, further benefiting users with allergies.

In summary, the Shark HPB series, with models like the HPB-3520, HPB-4020, HPB-2011, and HPB-3530, showcases the brand's commitment to quality and innovation. Each model incorporates unique features and advanced technologies that cater to different cleaning needs, making them suitable for various households. Whether you need robust suction, versatile cleaning options, or a budget-friendly solution, the Shark HPB series has a vacuum that meets your requirements.
Top Page Image Contents