Location of the Washing Machine

Installation

4.Adjust the level of washing machine by the adjustable feet. Please check if there is a gap between the four adjustable feet and the floor. If there is then adjust the level of the washing machine by turning the adjustable feet. Make sure that the machine does not sway and that it is completely level. After the adjustment is finished, turn the fixing nuts up tightly, so that the adjustment that has been made is fixed.

NOTE

There should be no swaying of machine and all the adjustable feet should sit/touch the floor.

•Check location where the washer will be installed. Make sure you have everything necessary for correct installation.

•Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

•Do not place or store laundry products on top of washer at any times.

•Install the washer on the horizontal solid floor. If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or down for horizontal installation.

•Ventilation openings must not be obstructed by carpeting when the washer is installed on a carpeted floor.

•Leave some space (right & left : 2cm, rear : 10cm).

•In case of built-in installation, the distance between top of the washer and bottom of upper plate should be at least 3mm.

For Customer Services & Spare Parts please call 0845 208 8750

Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at