Installation
For convenience, dryers are often positioned close to the washing machine, so the laundry can be easily transferred. The tumble dryer will expel moist air, and it’s recommended this is directed outside to avoid condensation accumulating inside a room. Position the vent hose supplied, through a window or similar.
Install the dryer in a clean environment, and make sure there are no obstructions around any vents. It should be placed on a firm level surface, this helps keep noise and vibration to a minimum.
There should be no movement from the dryer. Adjust the feet underneath the dryer to make sure it is completely stable. Do not remove the feet from the dryer.
The hot air emitted from the tumble dryer can reach temperatures of 60c, therefore, make sure the floor can handle these temperatures. The tumble dryer works best in a room between 5c and 35c.
Position the other end of the vent hose outside so the moisture can escape. Contact a qualified tradesman to fit the vent hose so it exits through a wall or door.
Fitting the vent hose
Use the rear or side vent, whichever is more convenient.
Align the arrows on the hose and on the ring nut. Push in and rotate to secure the hose (A).
Add the snap cover to the unused vent hole, in this diagram it is on the side.
Moisture may accumulate in the hose, it may be useful to drill a small hole at a low point to allow the moisture to escape (B). Do not allow more than two bends in the hose.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 9am – 5pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
16