USER INSTRUCTIONS C88
Thank you for purchasing the Reliable™ C88 vacuum pressing table. Please follow the instructions carefully. With proper care and maintenance, your ironing table will provide years of dependable service.
The C88 is equipped with a powerful and fast vacuum motor. The strong vacuum will give you a
1.Unfolding: Hold the ironing board in a vertical position with the tip downwards; press the handle (5) placed underneath the board and lift up the working surface by pulling with the foot outwards until the desired height is reached.
2.Unfold the boiler support (3) and place the steam generator on the shelf.
3.Insert the electrical plug into an electrical outlet.
4.Place the pedal (1) near the working area.
5.Push the on/off switch (2) on the “I” position.
6.Wait for a few minutes until the working surface is warmed up.
7.Start ironing.
8.The vacuum function is controlled by the pedal (1)
9.You can use the vacuum function at the same time as you are ironing, or you can use it after the ironing (for very light fabrics this may be the preferred way).
10.At the end of the ironing we suggest you leave the on/off switch (2) on for a few minutes to ensure the inside of the table is dry and free of condensation.
11.Folding: turn the on/off switch (2) off, remove the plug from the outlet. Take the boiler and the iron off of the boiler support (3), fold the boiler support (3), and make sure there is no garment on the working surface and/or on the catch tray (4).
12.As soon as the working surface is cool, position the ironing board vertically with the tip downwards, press the handle (5) placed under the working surface and at the same time pull the legs (6) inward.