Using your Ultura Dry Iron, Care and Cleaning

Using your Ultura Dry Iron

Before first use

Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits.

NOTE: When turned on for the first time, your new iron may give off vapours for up to 10 minutes. This is due to the initial heating of the materials used. It is safe, not detrimental to the performance of the iron, and will not reoccur.

Using your iron

1.Insert the 3 pin plug into a 230/240 volt power outlet and turn the power on.

2.Turn the temperature dial to the desired setting by aligning the setting on the dial with the temperature indicator. The thermostat light will illuminate to indicate that the iron is heating to the selected temperature. When the thermostat light goes out the iron is at the selected temperature and is ready to iron.

NOTE: When the temperature dial is changed from a high setting to a lower temperature setting during ironing, the thermostat light will go out immediately. This indicates that the iron is cooling to the selected temperature. To ensure that the iron has reached the selected temperature and is not too hot, wait until the thermostat light comes on again and then goes out before ironing.

Care and Cleaning

After each use

1.Turn the power off and remove the plug from the power outlet.

2.Allow the iron to cool before winding the cord around the built-in cord wrap.

Storage

Always store the iron on its heel rest.

NOTE: Do not store the iron with the soleplate facing down, or in the carton.

Cleaning

To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.

Caution: Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron as these will damage the surface.

Cleaning the Teflon® Platinum Pro non-stick soleplate

The non-stick coating reduces sticking of fabrics and starches to the soleplate. Do not iron over sharp objects such as buttons, studs and zippers, as these will scratch the surface.

Wipe the soleplate with a damp soft cloth after each use. If polyester has burnt to the soleplate, iron a damp cotton cloth while hot.

Caution: Do not use scouring pads, abrasives or harsh cleaners to clean your Teflon® Platinum Pro soleplate, as these will scratch and damage the surface.

2600 specifications

The Sunbeam 2600 is a robust and versatile appliance that embodies the fusion of technology and design in the realm of home cooking. Notable for its innovation, this appliance is tailored to meet the needs of modern culinary enthusiasts and everyday cooks alike, making it a staple in many kitchens.

One of the key features of the Sunbeam 2600 is its impressive heating capabilities. Equipped with a powerful heating element, it ensures quick and efficient cooking, allowing users to prepare meals in a fraction of the time compared to traditional methods. This feature is particularly beneficial for busy individuals and families looking to streamline their meal preparation without compromising on quality.

The design of the Sunbeam 2600 is both sleek and functional. Its ergonomic handle provides comfort during use, while the non-stick cooking surface ensures easy food release and hassle-free cleaning. This attention to user experience is evident in every aspect of the appliance, promoting a seamless cooking process that encourages creativity in the kitchen.

In terms of technology, the Sunbeam 2600 boasts advanced temperature control features. Users can easily adjust the heat settings to achieve the perfect cooking conditions for various types of food. Whether frying, grilling, or steaming, the appliance delivers consistent results, thanks to its accurate temperature regulation.

Safety is paramount in the design of the Sunbeam 2600. The appliance is equipped with a range of safety features, including overheating protection and a heat-resistant exterior. These features not only provide peace of mind during use but also make it suitable for cooks of all skill levels, including beginners.

The Sunbeam 2600 is also designed with versatility in mind. It can be used for a wide array of cooking methods, making it an ideal solution for preparing diverse dishes, from breakfast favorites to elaborate dinners. Additionally, its compact size makes it perfect for kitchens with limited countertop space, further enhancing its appeal.

Overall, the Sunbeam 2600 stands out for its blend of efficiency, safety, and versatility. This appliance is not just a tool for cooking; it represents a lifestyle choice for those who value quality and convenience in their culinary endeavors. With its array of features designed to simplify the cooking process, the Sunbeam 2600 is set to become an indispensable part of any home chef's arsenal.