9.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines.
10.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodi- cally and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
11.Do not abuse the power cord. Do not yank compressor’s cord to disconnect it from the receptacle. Do not carry tools by the cord.
12.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in.
13.Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging in. Do not carry any tool with your finger on the trigger, whether it is plugged in or not.
14.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
15.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is dam- aged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.
16.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
17.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
18.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
19.Drain compressor every day. Do not allow moisture to build up inside the compressor. Do not allow compressor to sit pressurized for longer than one hour.
20.Make sure all equipment is rated to the appropriate capacity. Make sure that regulator is set at least 10 PSI lower than the lowest rated piece of equipment you are using.
Unpacking
When unpacking, check to make sure that all parts are included (see the Parts List and Parts Diagram on pages 6 and 7 ). If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
#38347 | Page 3 |