Buhler 2595, 2596 manual PRE Operation

Page 12

bühler

Allied Front-End Loader

PRE – OPERATION

WARNING The tractor must be equipped with an approved Roll over Protection Structure (ROPS) and safety belts to help prevent personal injury or death caused by tractor roll over.

CAUTION Maximum rated loader capacity may exceed tractor rating. Load restrictions or reduction in hydraulic operating pressure may be required for safe operation.

Rops: Do not exceed the manufacturer’s rating for maximum gross vehicle weight. Refer to the Tractor Manual or the ROPS Serial Decal for rating. Do not alter or modify the ROPS structure.

Tractor Tires: Space rear tires as recommended by the tractor manufacturer. Tire inflation and capacity must meet or exceed additional weight of loader, attachment and payload. Maximize width for high lift applications. Tread width must not exceed maximum width as recommended in the Mounting Kit Listing.

WARNING Add rear ballast to help prevent personal injury or death

caused by tractor roll over.

Rear Ballast: Rear ballast is required to ensure 25% of gross vehicle weight is transferred to the rear axle. Attachment and load must be included as weight. Adequate rear weights are required to counterbalance maximum loader capacity and safe loader operation. Weight can be added as rear tire liquid (calcium solution), rear wheel weights, rear axle weights and/or three point hitch mounted ballast or implement. Ballasting will vary with tractor and loader attachment. Refer to the Tractor Manual for recommended ballasting.

- 10 -

P4094

Image 12
Contents Page Warranty Claims Warranty LaborBühler 2595 & 2596 OPERATOR’S and Parts ManualLoader Specifications Illustration TSL shownSpecification Chart REG TSLIntroduction Serial Number here Safety General Safety NotesBühler Allied Front-End Loader Safety Decal Location Electrocution Hazard PRE Operation Operation Bucket Backfilling or Scraping Bühler Handling bales and pallets Level indicator Grapple Installing / Removing Loader InstallingRemoving Bühler Installing / Removing Loader Attachments Lubrication TSL Loader ShownMaintenance General InspectionBolt Torque Chart Mounting KitHydraulics Bühler Cable Sleeve Jam Nut Lock Washer Screw TSL General Note and Instructions Trouble Shooting Problem Possible CauseTrouble Shooting Problem Possible Cause Remedy Parts Appendix 2595 2595 S 2596 2596 S Main Frame Assembly Description 2595 2595 S 2596 2596 S 2595 2595 S 2596 2596 S Hydraulic Plumbing Assembly Bühler TSL 2595 S TSL 2596 TSL 2596 S TSL Main Frame Assembly Item Part No Description TSL 2595 S TSL 2596 TSL 2596 S TSL Bühler Description 2595 2595 S 2596 2596 S Bühler 2595 & 2596 Cylinder Assembly TSLTrue Self Leveling Manifold Description QtyCartridge QtyHydraulic Fitting Torques Prevailing Torque LocknutsPage Buhler Manufacturing a partnership