Steam Ironing
1.Follow the instructions for “Filling the Water Reservoir” on Page 6.
2.Plug the cord into a
3.Turn the Fabric Select dial to the Steam ironing fabric setting you desire (Linen, Cotton or Wool) and allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 10 for the recommended setting for your fabric.
4.After the iron has heated (2 minutes), turn the Steam dial to the appropriate steam setting.
5.The Temperature Indicator Light remains on until the iron reaches the appropriate temperature.
How To Use the Special Functions
SPRAY MIST®
The SPRAY MIST® feature dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases.
To use the SPRAY MIST® feature:
Press the SPRAY MIST® button firmly.
Caring for Your Iron After Use
TURNING OFF YOUR IRON
1.Turn the Steam dial to DRY and the Fabric Select dial to OFF.
2.Unplug the iron from the power source.
WARNING: NEVER yank the power cord when unplugging the iron, this can damage the cord.
8