Steam Ironing
1.Follow the instructions for “Filling the Water Reservoir” on Page 6.
2.Plug the cord into a
3.Turn the Fabric Select dial to the Steam ironing fabric setting you desire (Linen, Cotton or Wool) and allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 11 for the recommended setting for your fabric.
4.After the iron has heated (2 minutes), turn the Steam dial to the appropriate setting.
5.The Temperature Indicator Light will go off when iron reaches appropriate temperature.
How To Use the Special Functions
SPRAY MIST®
The SPRAY MIST® feature dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases.
To use the SPRAY MIST® feature:
Press the SPRAY MIST® button firmly.
AUTO-OFF
When the iron is plugged in, the Power “ON” Indicator will light steadily, indicating that the iron is heating.
If you leave the iron:
•in a vertical position (on its heel rest) without moving it, the iron will automatically turn off after 15 minutes indicated by the blinking Power “ON” Indicator light.
•in a horizontal position without moving it (or it accidentally tips over), the iron will automatically stop heating after 30 seconds indicated by the blinking Power “ON” Indicator light.
IMPORTANT: The Power “ON” Indicator will continue to blink until the iron is unplugged.
To restart the iron:
Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will light steadily.
WARNING: The
8