Cannon IWE manual Wash cycles and options, Table of wash cycles, Wash options

Wash cycles and options

Table of wash cycles

cyclesWash		Max.	Max.	Detergents		Max. (kg)load	Residual dampness %	Energy consum- kWhption	waterTotallt	Cycle duration
	Description of the wash cycle	temp.	speed
		(°C)	(rpm)	Wash	Fabric
					softener
	Daily
1	White Cotton: extremely soiled whites.	90°	1400			8	53	2,45	83	175’
2	Cotton Standard (1): heavily soiled whites and resistant colours.	60°	1400			8	53	1,34	71	185’
3	Cotton Standard (2-3): lightly soiled whites and delicate colours.	40°	1400			8	53	1,01	84	180’
4	Synthetics: heavily soiled resistant colours.	50°	800			4	-	-	-	100’
4	Synthetics (4): lightly soiled resistant colours.	40°	800			4	46	0,56	60	95’
5	Mix Colored (5): lightly soiled whites and delicate colours.	40°	1400			8	53	0,79	61	95’
	20° Zone
6	Cotton Standard	20°	1400			8	-	-	-	175’
7	Mix Light	20°	800			8	-	-	-	120’
8	20’ Refresh	20°	800			1,5	-	-	-	20’
	Special
9	Outwear	30°	400		-	2,5	-	-	-	60’
10	Wool: for wool, cashmere, etc.	40°	800			2	-	-	-	90’
11	Jeans	40°	800			4	-	-	-	75’
	Sport
12	Sport Intensive	30°	600			4	-	-	-	85’
13	Sport Light	30°	600			4	-	-	-	60’
14	Special Shoes	30°	600			Max. 2	-	-	-	60’
						pairs
	Partial wash cycles
	Rinse	-	1400	-		8	-	-	-	36’
	Spin + Drain	-	1400	-	-	8	-	-	-	16’

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

For all Test Institutes:

1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.

2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 40°C.

This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.

3)Long wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.

4)Synthetic program along: set wash cycle 4 with a temperature of 40°C.

5)Short wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.

GB

Wash options

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics (refer to the

“Programme table”). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

!It cannot be used with the 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, , programmes.

The function saves energy by not heating the water used to wash your laundry - an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle.

For the best washing results we recommend the usage of a liquid detergent.

!It cannot be used with the 6, 7, 8, 10, 12, 13, 14, ,

programmes.

Extra Rinse

By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly useful for sensitive skin.

!It cannot be used in conjunction with the 8,

programmes.

Easy Iron

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the washing machine will perform slow ro- tations of the drum; the indicator lights for the EASY IRON and START/PAUSE options will flash (the first one green, the second orange). To end the cycle, press the START/ PAUSE button or the EASY IRON button. For the 9 wash cycle, the machine will end the cycle while the laundry is soaking and the EASY IRON and START/PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.

!It cannot be used in conjunction with the 8, 10, 12, 13, 14, programmes.

9