Cannon IWD manual ON/OFF button, Detergent dispenser drawer

Page 6

Description of the washing machine and starting a wash cycle

 

Control panel

GB

 

 

 

ON/OFF button

DELAY TIMER

button

DISPLAY

FUNCTION

 

 

buttons with

 

 

indicator lights

 

 

 

WASH CYCLE PROGRESS

START/

PAUSE

button with indicator light

Detergent dispenser drawer

WASH CYCLE

knob

TEMPERATURE

knob

SPIN SPEED

knob

DOOR LOCKED

indicator light

Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”).

ON/OFF button: switches the washing machine on and off.

WASH CYCLE knob: used to set the desired wash cycle (see “Table of wash cycles”).

FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.

TEMPERATURE knob: sets the temperature or the cold wash cycle (see “Personalisation”).

SPIN SPEED knob: sets the spin speed or exclude the spin cycle completely (see “Personalisation”).

DISPLAY: used to view the duration of the various cycles available and the remaining time of a cycle in progress;

if the DELAY TIMER option has been selected, the countdown to the start of the selected cycle will appear.

DELAY TMER button : press to set a delayed start time for the selected wash cycle. The delay time will be shown on the display.

WASH CYCLE PROGRESS indicator lights: used to monitor the progress of the wash cycle.

The illuminated indicator light shows which phase is in progress.

DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).

START/PAUSE button with indicator light: starts or tem- porarily interrupts the wash cycles.

N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened.

To start the wash cycle from the point at which it was inter- rupted, press this button again.

Standby mode

This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

Consumption in off-mode: 1W

Consumption in Left-on: 1W

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions for use Washing MachineUnpacking and levelling InstallationConnecting the electricity and water supplies See figureReplacing the fuse Removing the plugDisposing of the plug Following code First wash cycleBution board Disposing of the applianceTechnical data ON/OFF button Detergent dispenser drawerConsumption in off-mode 1W Consumption in Left-on 1W Indicator lights Starting a wash cycleSet the spin speed see Personalisation Wash cycles Table of wash cyclesTable of wash cycles PersonalisationFunctions Set for each wash cycleGarments requiring special care Detergents and laundryDetergent dispenser drawer Preparing the laundryPrecautions and tips General safetyDisposal Care and maintenance Troubleshooting ProblemPossible causes / Solutions Etc. Try the programme again using a different load Replacement of any removable parts made of glass or plastic AssistanceEssential Contact Information After Sales Service195099009.01 Recycling & Disposal Information

IWD specifications

Cannon IWD, a modern advancement in the field of industrial and commercial manufacturing, represents a significant evolution in in-line bulk supply systems. Primarily designed for the efficient mixing and dispensing of materials, Cannon IWD is particularly advantageous for applications in industries such as automotive, aerospace, and construction.

One of the main features of the Cannon IWD is its versatility. It can handle a wide variety of materials, ranging from polyurethanes to epoxies, and can be adapted to meet the specific requirements of diverse manufacturing processes. This adaptability ensures that manufacturers can optimize their operations, reduce waste, and improve overall productivity.

The technology employed in the Cannon IWD integrates precision dosing systems that utilize advanced control algorithms. These algorithms ensure accurate measurement and mixing of raw materials, allowing for consistency in production quality. This precision extends to the temperature control systems integrated into the design, which are critical for maintaining the properties of various materials. This level of control minimizes batch-to-batch variability, leading to uniformity in the end product.

Another characteristic of the Cannon IWD is its user-friendly interface. Operators can easily monitor and adjust settings through a digital display, which enhances operational efficiency and reduces the likelihood of human error. The system is designed for quick setup and easy maintenance, allowing manufacturers to minimize downtime and maximize output.

Moreover, safety is a top priority in the design of the Cannon IWD. Equipped with several fail-safes and emergency shut-off systems, it ensures that operators can work safely without the risk of dangerous material leaks or equipment malfunctions.

Cannon IWD also emphasizes sustainability, with features designed to reduce energy consumption and material waste. By optimizing the mixing process, the system allows for the reduced use of raw materials while still ensuring high-quality outputs, aligning with eco-friendly manufacturing practices.

In summary, Cannon IWD stands out as a robust, efficient, and sustainable solution for the industrial sector. Its innovative technologies, user-centric design, and commitment to safety make it an invaluable asset for businesses looking to enhance their production capabilities in an increasingly competitive market.
Top Page Image Contents