6STARTING UP AND LOCK FUNCTION SELECTION
using the appliance and practical tips
STARTING UP |
|
| a |
Start/Stop button |
|
a To start up the washing machine you |
|
have to press the Start/Stop button. |
|
The minutes remaining until the end of |
|
washing and drying will appear on the |
|
display at all times. |
|
LOCK FUNCTION |
|
Lock function selection | a |
| |
The lock function ensures that the programme |
|
will not be affected if any buttons are pressed. |
|
It is used when children could press the |
|
buttons, etc. |
|
The lock function should be activated after |
|
the wash programme has been selected |
|
together with all its options. |
|
Activating the lock function |
|
a The lock function is activated by pressing |
|
the Start/Stop button and holding it | b |
down for at least 3 seconds. | |
The display will show if it is activated. |
|
Deactivating the lock function
b The lock function is cancelled when the wash programme comes to an end. If you want to deactivate the lock function before the end of the programme, you have to hold the start button down again for at least 3 seconds. After 3 seconds, the lock function indicator will disappear from the display, and it will go into pause status.
The Start/Stop button does not cancel the lock function.
18