Bosch Power Tools WVT 52458 Trouble Shooting Minor Faults, Fault Possible cause

Page 35

Operating Instructions

33

 

Trouble Shooting Minor Faults

！Risk of electric shock

Repairs must only be carried out by our Customer Service or an authorized technician.

If repairs are needed, and assuming that you cannot elim- inate the fault youself with the aid the following table:

Turn the programme selector to Off .

Disconnect the washer-fryer from the mains.

Turn off the water tap.

Call Customer Service.

 

A signal emitted

Possible cause

Action

 

in display field

 

 

 

 

E01

Door not colosed properly.

Check whether laundry is trap-

 

 

 

ped in door;

 

 

 

Close the washer-dryer door.

 

 

 

 

E02

Tap not turned on.

Turn the tap on.

 

 

Inlet hose kinked or pinched.

Eliminate cause.

 

 

Filter blocked in water inlet

Clean filter, see 31.

 

 

hose.

 

 

 

 

 

Water pressure too low.

Eliminate cause.

 

 

 

 

E04

Lose debris is blocking the

Clean the pump, see page 30;

 

 

pump;

 

 

 

 

 

Drainage pipe blocked

Clean the drainage pipe.

 

 

 

 

 

 

 

 

 

 

 

 

Fault

Possible cause

The washer-dryer door

There is water in drum.

cannot be opened.

 

Safety function is active.

 

Action

,,,,

,,

,,

Select Draining

or Spinning .

Wait for 2 minutes.

Detergent residue in the

Detergent was damp or

detergent dispenser.

lumpy.

Clean and dry the detergent dispenser(refer to Page 30)

Use the dispensing aid for liquid detergent.

The gasket is crimped. This may appears after Remove the transport bolts, operate installing the transport bolts. the machine for a period of time, the

gasket will return to the original shape.

The belt gets off the pulley. Too much laundry is in the drum or the laundry is put in badly, and close the window with excessive force.

Put in the laundry well and according to the maximum load specifiction.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating and Installation Instructions 生产厂家： 中德合资 博西威家用电器有限公司 ： 中国江苏省无锡市高新技术开发区旺庄路66号 Table of Contents Your old machine Disposal Information The new machine s packagingEnvironmental Protection When washing and drying Precautions and WarningsBefore using for the first time Taking care of your machine When the programme has endedFilling laundry detergent and/or additive dispensers Your new washer-dryerProgram selector ButtonStart Buttons for additional optionsOther displays at this location Display panelMaximum load Programme status displayOverdosage Childproof lockReductions in time occur because of small loads Programme durationStart time Drying durationBasic programme Additional function Preparing the laundry First Wash CyclePreparing/sorting and loading the laundry Sorting the laundry Sorting the laundryDegree of dirt Preparing laundry for dryingRemoving stains Normal dirtIntensive dirt Typical stainsExplosion hazard Sorting laundry according to their care label specificationsRisk of explosion Loading the laundry！ Risk of explosion Amount of detergent Laundry Detergents and AdditivesFilling laundry detergent and/or additive dispensers Washing/drying with standard settingsOperating Instructions Setting the drying programme Washing/drying with individual settings Spin speed Deactivate the childproof lock Activating the childproof lockPause in active programme Cancelling active programChange a programme Signal for programme status SignalSignal for switching buttons on and off Intensive stains Programme table60-70 Dry weight in Kg Drying time selector Cupboard dryProgramme table drying 70-80 Intensive IronSetting Without final spin selected When the Program has endedUnloading the laundry Cleaning and CareCleaning the appliance housing and control panel Draining the washing solution Cleaning the drumClean the detergent dispenser Clean the drain pump！ Risk of Scalding Cleaning water inlet strainersWashing solution DrainingFrost protection Cleaning the strainer at the water tapCleaning the strainer on the washing machine Descaling the washer-dryerFault Possible cause Trouble Shooting Minor FaultsSignal emitted Possible cause Action Display field Possible cause Action FaultWash large and small items together to reduce imbalances Fault Possible cause Action！ Risk of injury Installation, Connection Safety information TransportDimensions Removing the transport bolts Installation locationHose and cable lengths Water supply Water connectionWater Drainage Leveling procedureTransport e.g. when moving Electrical connection Package Sheet Technical DataModels ItemsRepair Indicator Customer ServiceService Assurance Warranty card 5120 004791PD 84 09

WVT 52458 specifications

The Bosch Power Tools WVT 52458 stands out as a versatile and dynamic solution for professionals and DIY enthusiasts alike. This powerful tool is engineered to tackle a wide array of applications, thanks to its distinctive features and advanced technologies.

At the core of the WVT 52458 is its high-performance motor that delivers impressive power output. With a robust design, this power tool is suited for heavy-duty tasks, ensuring reliability and efficiency whether on the job site or at home. The motor is optimized for durability, reducing the likelihood of overheating and allowing for extended usage without performance degradation.

One of the hallmark technologies integrated into the WVT 52458 is Bosch's innovative Electronic Speed Control. This feature allows users to adjust the speed settings according to their specific tasks, providing more control and precision when handling different materials. Whether you're working with wood, metal, or plastic, this tool adapts seamlessly, leading to enhanced results.

Another notable characteristic of the Bosch WVT 52458 is its ergonomic design. The tool is equipped with a comfortable grip that minimizes fatigue during prolonged use. This design consideration is essential for users who may spend long hours operating the tool, ensuring productivity without compromising comfort. The balanced weight distribution further aids in user control, making it easier to maneuver in tight spaces.

The WVT 52458 also boasts an effective dust extraction system. This feature not only keeps the workspace cleaner but also enhances visibility and safety for the user. Additionally, the built-in safety features, including an overload protection system, protect both the tool and the user from potentially hazardous situations.

Versatility is a key aspect of the WVT 52458, as it is compatible with a wide range of attachments and accessories. This adaptability makes the tool suitable for various projects, from delicate tasks to heavy-duty work. The quick-change mechanism allows for swift switching between attachments, which is essential for professionals who require efficiency in their workflow.

In conclusion, the Bosch Power Tools WVT 52458 is a powerhouse designed for those who demand high performance and reliability. With its advanced motor, Electronic Speed Control, ergonomic design, effective dust management system, and compatibility with various attachments, it remains a top choice in the market for both professionals and DIY enthusiasts. Whether for home improvement projects or professional construction tasks, the WVT 52458 delivers exceptional results every time.
Top Page Image Contents