AEG 88840 manual Water cooling, To set the water cooling function, To cancel water cooling

Operating Instructions

Water cooling

	It may be necessary to cool the water before draining, to prevent ther-
	mal damage to the plastic outlet pipes.
3	The water is cooled before draining out at the end of the main wash
	(by adding cold water).

(This setting is only available with the COTTONS/LINEN, EASY-CARES programmes, with temperatures over 40 °C.)

When the washing machine is delivered, water cooling is not set, except for the SENSITIVE programme option.

To set the water cooling function:

01. Turn the programme selector to SHORT SPIN.

2.Press and hold the PRE WASH button for at least 5 seconds.

When the button has been pressed for 5 seconds, MAIN WASH flashes on the Programme Progress display for 5 seconds.

3.While MAIN WASH is flashing, release the PRE WASH button. When it stops flashing, water cooling has been set. The function re- mains set until cancelled again.

4.If you want to check whether water cooling has been set:

–Turn the programme selector to SHORT SPIN.

–Press the PRE WASH button briefly.

If MAIN WASH flashes on the Programme Progress display, water cool- ing has been set.

To cancel water cooling:

01. Turn the programme selector to SHORT SPIN.

2.Press and hold the PRE WASH button for at least 5 seconds.

As soon as the button is pressed, MAIN WASH flashes on the Pro- gramme Progress display. After 5 seconds, MAIN WASH stops flashing and remains lit continuously for another 5 seconds.

3.While MAIN WASH is lit continuously, release the PRE WASH button. When MAIN WASH is no longer lit, water cooling has been cancelled.

3	The water cooling function raises water consumption and extends pro-
	gramme time.

42