AEG 50265 manual Compensate for floor unevenness

Page 42

Installation and connection instructions

Compensate for floor unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in the range +10 .. -5mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the threa-

ded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The

unit must not wobble over when loaded.

3. If necessary, check the setting

with a spirit level.

Important! Minor unevenness of the floor surface should never be levelled out by laying pieces of

wood, card or similar materials, but rather should always be com-

pensated for by adjusting the adjustable feet.

42

Image 42

Contents Lavamat 50265 Electronic Dear Customer Please read this user information carefullyContents Installation and connection instructions What to do ifWarranty conditions / Customer service centres Safety Before Using for the First TimeCorrect Use Safety of Children and Infirm Persons General SafetyDisposal Disposing of the Packaging MaterialDisposing of your old appliance Environmental tips Unit description Front viewDrawer for Detergent and Conditioners Control Panel Programme selectorCOTTONS/LINEN Gentle Rinse Programme Option ButtonsWOOL/Ñ Silk P Handwash DrainConsumption Values and Programme Times StainLoad Water Energy Time Before the First Wash Prepare washing cycleSort washing and prepare Types of Washing and Care Symbols Water softener Detergents and care agents Which detergent and care agent?How much detergent and care agent? Water hardness detailsRunning a washing cycle Brief instructionsAfter the washing programme has ended Opening and closing the door Add the washingSTART/PAUSE Or for water softener If using liquid detergents/tabletsAdding detergent/conditioners Compartment for main wash powder detergentsSetting the washing programme For the appropriate proProgramme Progress Changing Spin Speed/selecting oRINSE HoldStarting the Wash Programme Programme Progress DisplaySelecting a programme option Changing or cancelling the programmeChanging the washing programme Changing the Spin SpeedWashing cycle complete/removing the washing Programme Tables WashingSeparate Rinsing Separate SpinningType of washing Cleaning and Care Detergent DrawerWashing Drum Main doorRemedying Faults Problem Possible cause RemedyWhat to do if Moved Creased Has been put in the drum Care fabrics, select Programme continues When power is restored If at the end of the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey spots on the washing If there are white remnants on the washingCarrying out emergency drainage When the water is completely drained Drain pumpOperating Instructions To cancel the additional rinse cycles Additional rinse cycles Á+/RINSE+To set the additional rinse cycles Child Safety Feature Cancelling the child safety featureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Prepare the installation place Installation on a concrete baseInstallation on vibrating floors Compensate for floor unevenness Electrical connection Water connectionPermissible water pressure Water inflow Water drain-off inside a siphon Water drainDelivery heads over 1m Water drain-off inside a basinTechnical data DimensionsWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroBulgaria Kuwait/Arabian Gulf Australia Korea South NamibiaCroatia New Zealand Cyprus Lebanon OmanThailand Slovakia Rep South Africa Israel Malaysia Saudi ArabiaJapan Singapore Slovenia HungaryIndex Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG