AEG 48380 User information Symptom Cause, Noisy, Washing machine is not leveled, Properly packed

Page 34

User information

Symptom

Cause

 

 

 

 

 

 

The machine is vibrating or

•

not all the packing was removed from

noisy :

 

the machine (see unpacking section),

 

•

the washing machine is not leveled

 

 

and properly packed,

 

•

the washing machine is too close to

 

 

the wall or furniture,

 

• the washing is not well distributed in

 

 

the drum,

 

• the load is not sufficient.

The washing cycle is much

•

the water inlet is blocked (No inco-

too long :

 

ming water. Check tape & hose)

 

• there was a power supply failure or the

 

 

water was cut off,

 

•

the motor temperature safety device

 

 

tripped,

 

•

the water inlet temperature is lower

 

 

than normal,

 

• the foam detection safety system trip-

 

 

ped (too much detergent) and the

 

 

washing machine evacuated the foam,

 

• the anti-unbalance mass safety device

 

 

tripped, an additional phase was

 

 

added to distribute the washing in the

 

 

drum better.

The washing machine stops

•

the water or electricity supply is

during a washing cycle :

 

defective,

 

• a rinse hold was programmed.

The cover does not open

•

the «IMMEDIATE OPENING»* light is off,

during the cycle :

•

the temperature of the washing water

 

 

is too high,

 

•

the cover cannot open until 1 to 2

 

 

minutes after the washing machine

 

 

has stopped*.

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Lavamat 48580 aqua control Lavamat 48380 aqua control Switching on the appliance for the first time User informationUser information For the User UsagePrecautions against frost Scrapping Protection of the environmentDescription of the appliance What is shown in the displayControl panel If you want to keep the language Prior to using for the first timeSetting the time Press the OK pushbuttonCarrying out a wash programme prior to first use Preparing washing Preparing and sorting washingSorting washing Loading the washing Running a washing cycleProportioning of detergents Changing spin speed / Selecting rinse hold Switching on the appliance/Selecting a programmeTemperature is displayed Easy CaresSetting options Press the Option key To switch off the option, pressPrewash, Sensitive, Stain, Night Cycle Repeatedly until the exit iconTime Saving Short or Very Short Setting timesDelay Start TimeDesired period by which you Want to delay the start, e. g. StartPress the Time key Display now shows e. g., StartInterrupting a programme / Adding washing Starting a programmeProgramme progress Interrupting a programmeAdding washing Washing cycle complete / Removing the washingIf Rinse Hold or Night Cycle was selected Memory 1, 2 SetupSetting the memory LinenChanging the Memory VolumeRepeatedly Until Desired Volume LOW, noLanguage Extra RinsePress the Option key Repeatedly Until Clock Using the Option key Set Desired time. With each pressUsing the Option key Set Contrast and brightnessSorting and preparing your washing Washing guideWashing load depending on the nature of the ma Terial Detergents and additives International symbols Programmes tables Washing Max TimerType Washing Temperature Options Quantity WashingWashing type RinseSpinning RinseConsumptions and programme durations Technical CharacteristicsTotal Power Voltage / FrequencyDescaling the washing machine Care and cleaningDisassembly SurfaceReassembly Drain filterUser information Drain residual water Remove the filter Operating problems Around Has tripped bad distribution Washing in the drumOption is selected Height Drain siphon Wrong Foam that overflowed Excess deterWater inlet temperature is lower User information Symptom CauseMotor temperature safety device Foam detection safety system trip«Warning EA6 / See WaterTape & hose» appears InstructionsSee Installation and connection instructions This washing machine is heavy. Take care when moving itInstallation UnpackingPosition Moving your washing machine LevelingWater inlet Eletrical connectionAfter Sales Service GuaranteeDepending to the Sales Company AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG 146 6484 00 06/04

48380 specifications

The AEG 48380 is an advanced built-in oven that embodies the philosophy of precision and innovation in modern kitchen appliances. Designed to cater to the needs of both professional chefs and home cooking enthusiasts, this oven showcases a seamless blend of elegance and functionality.

One of the standout features of the AEG 48380 is its multifunctional cooking capabilities. With a wide range of cooking modes, including conventional baking, grilling, and fan-assisted cooking, users can easily switch between different techniques to achieve their desired culinary results. The fan-assisted mode ensures an even distribution of heat for perfectly baked goods and evenly roasted dishes.

Another significant attribute of the AEG 48380 is its intuitive touch control interface. The sleek, user-friendly display allows quick adjustments to cooking settings. It also provides easy access to pre-programmed recipes and automated cooking functions, reducing the guesswork often associated with new culinary experiments. This feature is particularly beneficial for novice cooks seeking guidance while experimenting with new dishes.

The oven incorporates advanced technology, such as the Professional Steam function. This innovation promotes moist cooking, locking in flavors and nutrients while ensuring a crisp outer layer for baked items. Steam cooking is an excellent option for those looking to maintain a healthier culinary lifestyle, making vegetables vibrant and retaining their nutritional value.

In terms of design, the AEG 48380 includes a high-quality glass door that not only enhances its aesthetic appeal but also allows users to monitor their cooking without losing heat. The internal light illuminates the oven cavity, offering full visibility of dishes in progress.

The AEG 48380 also prioritizes safety and convenience with features such as a child lock, ensuring that little hands cannot accidentally alter cooking settings. Moreover, the self-cleaning function utilizes pyrolytic technology, heating the oven to high temperatures to incinerate food residues and grease, making the cleaning process exceptionally easy.

With its combination of sophisticated design, smart technology, and user-friendly features, the AEG 48380 set a new standard for built-in ovens. It not only enhances the cooking experience but also complements the modern kitchen, making it a perfect choice for anyone looking to elevate their culinary skills. The AEG 48380 is indeed a powerful ally in the quest for culinary perfection.
Top Page Image Contents