Something not working?
Problem |
| Possible cause |
| Solution |
|
|
|
|
|
Something not working?
Unsatisfactory washing results
If the laundry looks grey and lime scale is found in the drum
Spinning starts late or the machine does not spin
The machine will not dry or the laundry is not dry enough
The unbalance detection | If the laundry is not evenly |
device that prevents | distributed inside the drum |
excessive vibration during | at the beginning of the |
spinning has cut in. | spin cycle, the machine |
| detects this and tries to |
| redistribute it more evenly |
| by means of a few drum |
| rotations. |
| Only when the laundry is |
| more evenly distributed |
| will the spin cycle be |
| performed, at a lower speed, |
| if the laundry is not evenly |
| distributed. |
| If, after about 15 minutes, |
| the laundry is still tangled, |
| the machine will not spin. |
| Therefore, if the laundry is |
| still wet at the end of the |
| cycle, it is advisable to |
| redistribute it manually |
| inside the drum and to |
| select the spin programme. |
|
|
The water tap is not open | Open the water tap. |
(E10). |
|
The drain filter is clogged. | Clean the filter. |
The drying time or degree of | Select the required function. |
dryness has not been selected. |
|
An appropriate drying time | Select the appropriate |
has not been chosen. | drying time suitable for the |
| required degree of drying, |
| according to the type of |
| fabric (cottons or synthetics). |
There is too much laundry | Reduce the load. |
inside the appliance. |
|
|
|
•Too little detergent has been used.
•An unsuitable detergent has been used.
•Stubborn stains have not been treated prior to washing.
•The programme/temperature has not been correctly selected.
If grey stains remain on the laundry
•Laundry stained with ointments, grease or oil has been washed with an insufficient amount of detergent.
•The temperature selected for the wash programme was too low.
•Fabric softener - especially the concentrated type - has come into direct contact with the laundry. Wash these stains immediately and pour fabric softener carefully.
Foam is still visible even after the last rinse
•Modern detergents often produce foam, even in the last rinse. How- ever the laundry has been completely rinsed.
White residue is left on the laundry
•This is due to insoluble components in modern detergents and is therefore not the result of insufficient rinsing. Shake or brush the laundry. In future, it may be better to turn garments inside out before washing them. Check the choice of detergent; try using liquid deter- gents.
40 | 41 |