Avanti TLW09W instruction manual Sink Faucet Connection, Disconnecting the Water Supply Hose

Page 11

SINK FAUCET CONNECTION

For normal kitchen-sink tap only use the inlet hose with cold water inlet.

Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly. Make sure to insert the rubber ring enclosed. Then connect tightly to your sink.

Note: Some faucets may require you to also use the female hose thread adapter between the male adapter and your sink faucet as shown below. Make sure the rubber ring is inserted and connect to your sink.

If water leaks from faucet connection or washer connection, turn off water and tighten fully using a wrench. Be careful not to over tighten and damage water connection. Turn on water supply and make sure no leaks are present.

DISCONNECTING THE WATER SUPPLY HOSE

Dismantling the hose directly may cause water to splash due to the possible high water pressure in the hose, even after the faucet has been turned off. Please take off the hose as per following steps, even if the faucet is closed:

•Turn off the faucet.

•Turn on the power and let the machine run for about 5 seconds then turn it off.

•Remove the connecting nuts from the faucet and washing machine.

Note: If the washing machine is frequently used, it is not necessary to dismantle the inlet hose to avoid possible damage to the screws.

POSITIONING THE DRAIN HOSE

Since only up drainage is available, drain hose can be hung in the basin or bathtub.

NOTE: The highest point of the drain hose must be in the height of 2.25 – 4 feet above floor level, otherwise, the washer cannot work normally.

CONNECTING

NUT

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual DE Instrucciones Page Table of Contents Your safety and the safety of others are very important Appliance SafetyImportant Safeguides Read this guide carefully Help US Help YOUParts & Features Important Safety Instructions Selecting a Location Before Using Your Portable WasherConnecting the Cold Water Supply Hose Installing the Noise Damper PlatePositioning the Drain Hose Disconnecting the Water Supply HoseSink Faucet Connection  Surge Protector  Electrical Connection Extension Cord Control Panel Before Washing Operating Your Portable WasherPreparation Before Washing Manual Functions Selection Custom Washing Cycle Operating InstructionsAutomatic Wash Programs Cleaning Your Portable Washer Care and MaintenancePage Avanti Products Customer Services Problems with Your Portable WASHER?Your Avanti Products Warranty ADVERTENCIA Page Remover LA Plataforma a Prueba DE Ruido DE LA Caja Panel DE Control Hacia LA Derecha Instrucciones Para Operar LA Lavadora Modo DE Empleo PreparacionMantenimiento DE Invierno Limpiando EL Filtro DE PelusasPage Page Registration Information TLW09W V2.0

TLW09W specifications

The Avanti TLW09W is a compact yet powerful portable washing machine that caters to the needs of those seeking convenience without compromising on performance. Designed with modern living in mind, this unit offers efficient washing capabilities while taking up minimal space, making it an ideal choice for apartments, dorm rooms, or small households.

One of the standout features of the Avanti TLW09W is its impressive 9-pound load capacity, allowing users to handle a sizable amount of laundry in a single cycle. This model is equipped with multiple wash cycles, including normal, heavy, and delicate settings, providing versatility for different fabric types and washing requirements. The adjustable timer and water level settings further enhance its functionality, enabling users to tailor their washing experience.

The Avanti TLW09W also boasts a powerful motor that ensures quick and efficient operation. With a maximum spin speed of 1,000 RPM, this portable washing machine effectively extracts water from clothes, reducing drying time. Its compact design includes a built-in drain pump, ensuring that water is easily expelled after each wash without the need for manual intervention.

In terms of technology, the Avanti TLW09W is user-friendly, featuring a simple control panel that allows for easy selection of wash programs. The LED display provides clear information on the selected settings, making it accessible for all users. Additionally, the unit operates quietly, making it suitable for use in noise-sensitive environments.

The design of the Avanti TLW09W is not only functional but also aesthetically pleasing. With a sleek white finish, it fits well into any modern home decor. Its lightweight construction makes it easy to move and install, further enhancing its appeal for those in need of a portable solution.

Safety is also a priority with the Avanti TLW09W. The machine is designed with overload protection and an automatic shut-off feature, ensuring safe operation. Overall, the Avanti TLW09W delivers an efficient and reliable laundry solution, making it an excellent investment for those who value convenience and performance in their washing machines.
Top Page Image Contents