JVC KS-FX915R, KS-FX815 manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 35

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

45 W per channel

Rear:

45 W per channel

Continuous Power Output (RMS):

Front:

17 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

17 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0 V/20 kΩ load (250 nWb/m)

TUNER SECTION

Frequency Range:

 

FM1/FM2:

87.5 MHz to 108.0 MHz

FM3:

65 MHz to 74 MHz

AM:

(MW)

522 kHz to 1 620 kHz

 

(LW)

144 kHz to 279 kHz

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape)

Signal-to-Noise Ratio: (Normal tape) (Dolby B NR ON): 65 dB (Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D):

Installation Size: 182 mm × 52 mm × 150 mm

Panel Size: 188 mm × 58 mm × 14 mm

Mass: 1.4 kg (excluding accessories)

Design and specifications subject to change without notice.

ENGLISH

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 μV

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents GET0018-001A EE KS-FX815Contents Display window Location of the ButtonsControl panel Only for KS-FX915R This section is only for KS-FX915R Remote controllerRemove the battery holder Installing the batteryPlace the battery Return the battery holderBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerManual search Radio Basic OperationsListening to the radio Searching a station manuallyStoring stations in memory FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Scanning broadcast stations Tuning into a preset stationManual preset Other convenient tuner functionsMode ModeTo deactivate the TA standby mode, press TP Using Standby ReceptionPTY Standby Reception TA Standby ReceptionTo store your favorite programme types Press SEL select to finish the settingSearching your favorite programme Selecting your favorite programme for PTY Standby ReceptionLast selected PTY code appears Other convenient RDS functions and adjustmentsListening to an FM station Changing the display mode whileSetting the TA volume level Automatic clock adjustmentPTY codes To fast-forward and rewind a tape Tape OperationsListening to a cassette To stop play and eject the cassetteTo play back tapes recorded with the Dolby B NR Prohibiting cassette ejectionFinding the beginning of a tune Playing the current tune repeatedly Other convenient tape functionsSelect the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelSCM OFF Beat Soft POP Using the sound control memoryRecalling the sound modes Selecting and storing the sound modesRepeat the same procedure to store other sound modes Storing your own sound adjustmentsTo reset to the factory settings Call up the sound mode you want to adjustOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedureDAB AF Preferred Setting Mode PSM items24H/12H To select the level meter Level To cancel Advanced SCM SCM LinkTo select the dimmer mode Dimmer To set the clock display ClockAttaching the control panel You can detach the contol panel when leaving the carDetaching the control panel Select the CD automatic changer CD-CH CD Changer OperationsPlaying CDs To fast-forward or reverse the trackTo go to a particular disc directly CanceledSelect the external component CD-CH External Component OperationsBefore you start What is DAB system?Select the DAB tuner Select the DAB band DAB1, DAB2 or DAB3To tune into a particular ensemble without searching To restore the FM/AM tunerSelect a service you want to listen to Service name Ensemble name Channel number FrequencyEach time you press Button, the DAB band Changes as follows Storing DAB services in memorySelect the DAB band DAB1, DAB2 or DAB3 you want To use Alternative Reception Tuning into a preset DAB serviceSelect the number 1 6 for the preset DAB service you want While receiving a DAB serviceIgnition key-off release/Ignition key-on play MaintenanceTo clean the heads To keep the tape cleanCD changer does not Function incorrectly due to TroubleshootingSymptoms Causes Remedies LW Tuner SpecificationsFM Tuner MW TunerHaving Trouble with operation? Please reset your unit GET0018-002A EE KS-FX915RSound is distorted Power cannot be turned onFuse blows No sound from the speakersElectrical Connections Connecting the leads / Пîäêëþ÷åíèå êîíòàêòîâ

KS-FX915R, KS-FX815 specifications

The JVC KS-FX815 and KS-FX915R are two prominent car stereo receivers that exemplify innovation and user-friendly features, catering to a diverse range of automotive audio enthusiasts. These models stand out with their advanced technologies and robust design, delivering an exceptional listening experience tailored for a variety of musical preferences.

One of the main features of both the KS-FX815 and KS-FX915R is the incorporation of the CD receiver capability, allowing users to play their favorite CDs with pristine sound quality. Additionally, these models support MP3 and WMA playback, providing versatility for users who prefer digital music formats. The USB input and auxiliary input further enhance connectivity options, making it easy to connect external devices such as smartphones or portable media players.

The KS-FX915R takes connectivity a step further by offering Bluetooth functionality, enabling hands-free calling and wireless audio streaming. This feature not only enhances convenience but also prioritizes safety, allowing drivers to keep their focus on the road while enjoying their favorite tracks. The inclusion of Bluetooth makes the KS-FX915R a more modern option for those looking to integrate their mobile devices seamlessly into their car audio system.

Both models boast an impressive output power, delivering clear and dynamic sound to transform any car into a mobile concert venue. The built-in equalizer provides users with the ability to customize their listening experience by adjusting the audio settings to suit different genres of music, ensuring optimal sound performance.

Additionally, the KS-FX815 and KS-FX915R feature an ergonomic design with an intuitive user interface, facilitating easy navigation through tracks and settings. The bright, easy-to-read display enhances visibility, ensuring that users can enjoy their audio without distraction. Furthermore, the inclusion of radio functionalities such as AM/FM tuning with RDS serves to provide a wide range of listening options, from local broadcasts to regional stations.

In conclusion, the JVC KS-FX815 and KS-FX915R car stereo receivers embody a blend of tradition and modernity in automotive audio technology. With features designed for both convenience and superior sound quality, these models cater to a range of audio preferences while ensuring a safe and pleasurable driving experience. Whether one opts for the KS-FX815 or the more advanced KS-FX915R, quality sound and a superior listening experience are assured.
Top Page Image Contents