Smeg WDI12C1 manual Cleaning the Detergent Tray, Cleaning the Water Inlet Filter

Page 27

EN

3.Pull out the drain hose “A”.

Attention: if the hose is hot it means the water is hot or boiling. Place a tray on the floor and remove the plug “B” to drain the water. Depending on the quantity of water, it may be necessary to empty the tray several times.

When no more water comes out, push the hose back in and screw back the plug “B”.

4.Unscrew the cover of the pump “D” by turning it anti-clockwise. Clean the pump body and remove any foreign bodies.

Check the inside “E” and make sure the impeller turns freely. If there are any foreign bodies, remove them.

5.Screw the pump cover back on.

Fix the drain hose by snapping the plug into place «C». Depending on the model, put back the cover as follows:

MODEL A – Insert the lower part of the cover first. Then secure it by turning the plastic buttons a quarter turn clockwise.

The slots in the buttons must be horizontal.

MODEL B – Insert the lower part of the cover first and then push it towards the base plate until it clicks into place.

7.5CLEANING THE DETERGENT TRAY

Keep the detergent tray free from scale.

To simplify this operation, completely remove the detergent tray (pull it out as far as it will go, lift it slightly and then pull fairly vigorously).

Remove the traps «B» (there are two traps if the machine is not fitted with a cover for the bleach compartment) and clean with hot water.

Put back the traps and remove any residues of detergent before putting the tray back.

7.6 CLEANING THE WATER INLET FILTER

The machine is fitted with a filter for protecting the water inlet valves.

The filter is fitted the gas thread of the inlet hose connected to the tap

Clean the filter if no water or insufficient quantities of water enter the washing machine. To do this, proceed as follows:

•Remove the plug from the socket to disconnect the machine from the electrical power supply.

•Turn off the water tap.

•Unscrew the inlet hose from the tap.

•Remove the filter from the inlet hose gas thread.

•Clean the filter with water and a brush.

•When screwing the inlet hose back on to the tap, make sure the filter is correctly positioned.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Washer Dryer Contents NEW Washing System Safety Warnings Page = brown N = blue = yellow-green Installation Instructions UnpackingPositioning and Levelling Water Supply Connection Additional Important Installation InstructionsElectrical Connection Drain ConnectionFitting the Furniture Doors Page Adjusting the hinges Page Control Panel Description of ControlsLED Display LEDEasy-iron button Timed drying shown on display LED Button activation shown on Washing Instructions Detergent TrayPreparing the Washing Opening the Door Loading the WashingAdding Detergent and Additives Dosing Powder Detergents Dosing Liquid DetergentsSCALE-REMOVERS Delicate washing programmes Modifying Starting ParametersInterrupting or Changing the Washing Programme Starting the Washing ProgrammeEND of Programme Beeper END of ProgrammeWASH-DRY Programme Using the Machine for Drying PurposesGeneral Information Timed DryingInterruption or Change of Drying Programme DRY-ONLY ProgrammeCleaning the Door Gasket Cleaning and MaintenanceExternal Cleaning Cleaning the DrumCleaning the Water Inlet Filter Cleaning the Detergent TrayTroubleshooting Error Signals Programs Options Other Symbols Control Panel Symbols

WDI12C1 specifications

The Smeg WDI12C1 is a versatile and innovative dishwasher that combines efficiency with cutting-edge technology, making it an ideal choice for contemporary kitchens. As a built-in model, it offers a seamless integrated design that enhances the aesthetic appeal of your space while saving room. This appliance is known for its high performance and modern features, catering to the needs of households looking for superior cleaning capabilities.

One of the standout features of the Smeg WDI12C1 is its capacity. This dishwasher can accommodate up to 13 place settings, making it suitable for families or those who frequently entertain guests. The adjustable racks and removable cutlery basket ensure optimal space utilization, allowing you to load various types of dishes, including larger pots and pans.

In terms of cleaning performance, the Smeg WDI12C1 is equipped with multiple wash programs tailored to different types of loads. The standard washing cycles, such as intensive, eco, and quick wash, ensure that users have options to suit their varying cleaning needs. Notably, the eco program conserves water and energy, making it an excellent choice for environmentally conscious consumers.

Moreover, the Smeg WDI12C1 features a modern inverter motor that operates quietly and efficiently. This technology not only improves performance but also reduces energy consumption, contributing to lower utility bills over time. The inverter motor also enhances the longevity of the appliance, ensuring that it withstands the test of time.

The convenience of the Smeg WDI12C1 is further highlighted by its user-friendly control panel, which features an intuitive display for ease of use. The delay start function allows you to set the dishwasher to begin its cycle at a more convenient time, while the half-load option enables efficient cleaning for smaller loads, saving both time and resources.

In terms of design, the Smeg WDI12C1 embodies the brand's commitment to style. It features a sleek, modern finish that complements various kitchen decors, while its compact construction makes it adaptable to various kitchen layouts.

Overall, the Smeg WDI12C1 combines functionality, efficiency, and an elegant design, making it a valuable addition to any kitchen. With its range of features, this dishwasher is perfect for those who value performance without compromising on aesthetics.
Top Page Image Contents