Smeg LBS-27-9, LBS107-9 manual Spin Speed selection, Special programs

Page 6

C Additional programs may differ according to the model of your machine.

• Delicates

You can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program.

• Daily

You can use this program to wash cottons and synthetics together. There is no need to sort them.

• Eco Synthetics

This program is suitable for clothes that are normally worn for a short time such as sportswear. It is used to quickly wash a small amount of cotton/synthetic blended clothes.

• Eco

This program washes for a longer period at 40°C and gives the same result as the “Cottons 60°C” program, thus it saves energy. It is suitable for clothes for which you cannot use the “Cottons 60°C” program.

• Quick

This program is used to quickly wash (30 minutes) a small amount of lightly soiled cotton garments.

• Intensive

Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people.

• Hand Wash

You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes.

C Sort the laundry according to type of fabric, color, degree of soiling and permissible water temperature when choosing a program.

spinning your laundry, select “Spin and Pump” program, and then select no spin function with spin speed selection button. Press “Start/ Pause/Cancel” button.

AYou should use a lower spin speed for delicate laundries.

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.

To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no spin is shown with “ ” symbols.

If you do not want to unload your clothes immediately after the program, you may use rinse hold function in order to prevent your clothes become wrinkled in anhydrous conditions. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry that you left in water:

-Adjust the spin speed.

-Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

Special programs

For specific applications, you can select any of the following programs:

• Rinse

This program is used when you want to rinse or starch separately.

• Spin & Drain

This program is used to apply an additional spin cycle for the laundry or to drain the water in the machine.

Before starting this program, select the desired spin sped and press “Start/Pause/ Cancel” button. Your machine drains the water after spinning at the set spin speed.

If you only want to drain the water without

6 - EN

Image 6
Contents LBS107-9 LBS127-9 Washing Machine Lavatrice First Use General SafetySafety instructions Intended useInstallation Initial preparations for washing Selecting a Program and Operating Your Machine Spin Speed selection Special programsProgram and consumption table Starting the Program Auxiliary functionsTime display Progress of programMaintenance and cleaning Draining any remaining water and cleaning the pump filter Solution suggestions for problems Problem Cause Explanation / SuggestionSpecifications