Main Functions of the Washing Machine, Wash Cycle

MODELLO: WLB 401 - LB 401 • WLB 601 - LB 601

MAIN FUNCTIONS OF THE WASHING MACHINE

A Start button

	C Optional function buttons
	G On/off button
	G P Programme and temperature knob
C A S	S Machine “on” indicator light
C A S

USING THE WASHING MACHINE

▼WASH CYCLE:

(follow these instructions and the washing machine will run the selected wash cycle)

1.Open the door

2.Load the washing in the drum and close the door.

Warning: Do not overload the washing machine. It is not advisable to wash items that absorb large quantities of water such as carpets.

3.Add a low-suds detergent and softener designed for automatic washing machines in the respective compartments of the detergent dispenser (see chapter “USE OF DETERGENTS”).

4.Close the detergent drawer. Do not open the drawer while the machine is working as this may cause water to spill out.

5.Press the On/Off button (G).

6.Rotate the programmer knob (P) to select the required program and temperature according to the type of fabric to wash (see: “PROGRAM TABLES”).

7.Select the (C) buttons with the functions required (see “OPTIONAL FUNCTIONS”). The pressed buttons will light up.

8.Press button (A) to start the wash cycle (see “START BUTTON”).

9.At the end of the wash, press the On/Off button (G) to switch off the washing machine.

10.Open the door and remove the washing.

11.With dry hands, unplug the washing machine from the mains supply.

12. Close the water feed valve.

▼LOAD IMBALANCE CHECK DURING SPINNING:

This washing machine is fitted with a special electronic load balancing control system. Before each spin, the system makes sure that the clothes are distributed as uniformly as possible in the drum. If the washing is not distributed uniformly, the final spin speed is reduced for safety reasons, while if the load is drastically out of balance, the spin is not effected.

SM1639