Cleaning the water tank
Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water, reinstall the top cover mechanism and fasten the latches.
When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door. Make sure that parts removed during cleaning (if any) are installed correctly into their original locations. Otherwise, water may leak.
Important:
Water tank and components of water dispenser are not
Safety lock for Water Dispenser
You may use the lock in order to avoid small children tampering with the water dispenser. To do this, slide the locking latch from left to right as illustrated in the figure. You must slide the latch back to left position in order to use the water dispenser.
To avoid accidental water dispensing, we recommend you to lock the water dispenser.
UNLOCK LOCK
Water tray
Water that drips while using the water dispenser accumulates in the drip tray. Remove the drip tray by pulling it towards yourself and empty it from time to time.
Remove the plastic drainer part as shown in the diagram by pressing down on the edge.
Remove the water valve from the water tank as shown in the diagram. When
8 | 9 |