JVC TD-W354 manual Pour le Canada Attention, Installation, Cleaning the cabinet, Cassette tape

Page 4

(Pour le CANADA) ATTENTION

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

9)Do not insert any metallic objects into the unit.

10)Unplug the power cord when there is a possibility of light- ning.

11)If water gets inside the unit, unplug the power cord from the outlet and consult your dealer.

12)Do not block the ventilation holes of the unit so that heat can escape. Do not install the unit in a badly ventilated place.

13)Be sure to unplug the power cord from the outlet when going

out or when the unit is not in use for an extended period of time.

2. Installation

1)Avoid placing the unit on or adjacent to an amplifier, to pre- vent hum from being produced by some types of amplifiers. Move the unit to a place not affected by the amplifier. Keep the unit as far as possible from a TV set.

2)Avoid installing the unit in a location subject to ambient tem- peratures exceeding 40 °C (104 °F) (e.g. direct sunlight, near heaters, etc.) or less than 0 °C (32 °F), excessive humidity, dust or vibrations.

3)If this set is moved suddenly from a cold place (0 °C) to a warm place, it may not function properly because of moisture

generated inside the unit. The unit will function properly 30 minutes after being moved.

3. Cleaning the cabinet

Never use benzine or thinner for cabinet cleaning as they may damage the surface finish.

4. Cassette tape

1)Loose tape may become tangled in the tape transport mechanism. Remove slack by winding the tape with a pen- cil.

(Fig. 2)

Fig. 2

Turn the pencil to tighten the tape.

2)The use of C-120 (120 minutes turn around) or thinner tape is not recommended, since characteristic deterioration may occur.

3)To prevent recordings from being erased accidentally, remove the tab(s) with a screwdriver. Reseal the slots with adhesive tape to erase and re-record after the tabs have been broken off.

Side ``A''

Tab ``B''

Side ``B''

Tab ``A''

Adhesive tape

Fig. 3

4)Do not store cassette tapes where there is a magnetic field (e.g. near a TV, etc.) or in a place subject to high tempera- tures or humidity.

5.Auto tape select mechanism (decks A and B)

This deck has an Auto Tape Select mechanism which distin- guishes between different types of tape from holes in the cassette. After the type of tape has been detected, bias and equalization are set to be suitable for the tape.

· Cassettes with the detection holes:

Metal tape (EQ: 70µs)

Type IV

CrO2 (chrome) tape (EQ: 70µs)

Type II

·Cassettes without the detection holes:

Normal tape (EQ: 120µs)

Type I

Some earlier types of metal and CrO2 (chrome) tapes may not be provided with the detection holes. Avoid using such tapes, since correct equalization characteristics cannot be obtained. Also do not use ferrochrome tapes whose charac- teristics do not match this unit.

CrO2 tape detection holes

Metal tape detection holes

6. Operations

1)Noise may be generated if the POWER switch is switched OFF with the deck set to playback or recording mode. Before switching the POWER switch OFF, confirm that the (stop) button has been pressed. (B version)

2)Many operations of this unit are performed under the control of a microcomputer. Use the unit only after carefully studying the descriptions and cautions in each item. If operations are done incorrectly, the unit may stop functioning correctly. If this happens, for the J version, unplug the power cord and

for the B version, set the POWER switch to OFF, so that the unit can function correctly.

± 4 ±

Page 3 Page 5
Image 4
Page 3 Page 5
Contents TD-W354 B/J VersionImportant In the United Kingdom If in DOUBT-CONSULT a Competent ElectricianContents FeaturesIntroduction Auto Reverse OperationInstallation Cleaning the cabinetPour le Canada Attention Cassette tapeConnections Cassette LoadingConnection to a stereo amplifier Note Remote cable connection for Compu LinkNames of Parts and Their Functions Playback Procedure Multi Music ScanRecording Deck B onlyDdrp Dynamics Detection Recording Processor record- ing Compu CAL ErrorsCompu CAL operation To leave non-recorded sections of more than 4±5 sec- onds To erase a tape without making a new recordingDolby NR and Dolby HX PRO Dolby NR System Dolby HX PRO headroom extensionAutomatic Source Selection Compu LINK-1 Compu Link Control SystemSynchronized Recording Compu LINK-1 Dubbing Maintenance Importance of cleaningCleaning the heads, pinch roller and capstan Demagnetizing the headsTroubleshooting Specifications LineLine OUT MOLVictor Company of JAPAN, Limited

TD-W354 specifications

The JVC TD-W354 is a well-regarded cassette deck known for its robust performance and user-friendly features, making it a notable choice for audiophiles and casual listeners alike. This dual cassette deck combines classic analog technology with modern conveniences, offering an impressive range of options for tape enthusiasts.

One of the standout features of the TD-W354 is its dual cassette mechanism, enabling users to play and record from both decks. This dual functionality allows for straightforward compilation of tape mixes and easy copying of cassettes, enhancing convenience for those who appreciate the charm of magnetic tape formats. The device supports both Type I (normal) and Type II (high bias) tapes, broadening its compatibility across different cassette types.

In terms of technology, the TD-W354 boasts a Precision Auto Stop feature, which automatically halts playback when the tape reaches its end. This prevents potential wear and damage to the tapes, prolonging their life and ensuring the integrity of the recordings. The unit also implements a Dolby NR (Noise Reduction) system, which can significantly reduce unwanted noise during playback, providing a cleaner, more dynamic sound experience.

Another important aspect of the JVC TD-W354 is its ease of use. The front panel includes straightforward controls that allow users to navigate the device with minimal hassle. With features like a large LCD display, users can easily monitor track information and playback status. Auto-reverse functionality further adds to the convenience, allowing continuous playback without the need to manually flip the tape.

The build quality of the JVC TD-W354 is another highlight, featuring a sturdy and aesthetically pleasing design that fits well in any audio setup. It offers analog audio outputs for connecting to amplifiers or other audio equipment, ensuring compatibility with a wide range of home theater or stereo systems.

Overall, the JVC TD-W354 represents a blend of nostalgia and functionality, making it a valuable piece of equipment for those looking to dive into the world of cassette tapes. With its reliable performance, user-friendly features, and robust construction, the TD-W354 continues to be a respected choice in the realm of cassette decks, appealing to both vintage enthusiasts and new listeners alike.
Top Page Image Contents