Blomberg WNF 6221 user manual First use, Electrical requirements, Fitting a different plug

Page 11

install a 13 Amp fuse.

• The specified voltage must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

BDamaged power cables must be replaced by the Authorized Service Agents.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

BThis appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.

2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr.

11

EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Washing Machine Explanation of symbols Table of Contents Overview Your washing machineTechnical specifications Intended use Important safety instructionsGeneral safety Childrens safetyPage Removing the transportation locks InstallationAppropriate installation location Removing packaging reinforcementConnecting to the drain Connecting water supplyElectrical connection Adjusting the feetFitting a different plug First useElectrical requirements Disposing of the old product Disposing of packaging materialTransportation of the product Preparing laundry for washing PreparationThings to be done for energy saving Sorting the laundryLoading the laundry Correct load capacityUsing detergent and softener Using limescale remover Using gel and tablet detergentUsing starch Using bleachesSoiling Level Clothes Tips for efficient washingProgramme selection Operating the productControl panel Preparing the machineSpecial programmes Temperature selectionAdditional programmes Spin speed selection Programme and consumption table Auxiliary function selection Child Lock Changing the Delayed Start periodCanceling the Delayed Start function Starting the programmeChanging the selections after programme has started Canceling the programmeSwitching the machine to pause mode Loading door lockCleaning the body and control panel Maintenance and cleaningCleaning the detergent drawer Cleaning the loading door and the drumDraining remaining water and cleaning the pump filter Page Tap is turned off. Open the inlet water taps fully TroubleshootingRecommended amount of detergent Select the proper temperature for the laundry to be washed Page Use smaller amounts of detergent for this type of item Page Guarantee Service once the manufacturers guarantee has expired ServiceBlomberg, 36-38 Caxton Way, Watford Hertfordshire, WD18 8UF

WNF 6221 specifications

The Blomberg WNF 6221 is a front-loading washing machine known for its efficiency, advanced technology, and user-friendly design. This model is particularly appreciated for its excellent energy rating, which not only reduces electricity consumption but also effectively contributes to lower utility bills.

One of the standout features of the WNF 6221 is its capacity. It can accommodate up to 6 kg of laundry in one cycle, making it suitable for small to medium-sized households. This capacity ensures that users can wash a substantial load without needing to run multiple cycles, thus saving both time and energy.

The machine's spin speed is another notable characteristic. With a maximum spin speed of 1200 RPM, the Blomberg WNF 6221 efficiently removes excess water from clothes, reducing drying time significantly. This feature is especially beneficial during colder months or in regions with high humidity, where drying clothes can be a challenge.

In terms of technology, the Blomberg WNF 6221 incorporates several advanced features. It is equipped with an automatic load detection system that adjusts the water and energy consumption based on the size of the load. This not only enhances efficiency but also ensures optimal washing results. The machine also has a range of washing programs tailored to different fabric types and soil levels, including quick wash cycles for those times when you need clean clothes in a hurry.

The design of the WNF 6221 is both sleek and practical. Its intuitive control panel features an easy-to-read display, making it straightforward for users to navigate through various settings. Additionally, the model operates quietly, which is a significant plus for those living in apartments or shared spaces.

Another appealing aspect of the Blomberg WNF 6221 is its commitment to environmental sustainability. The machine uses eco-friendly technologies that minimize water usage and energy consumption without compromising on performance. This makes it an excellent choice for environmentally conscious consumers looking to reduce their carbon footprint.

In summary, the Blomberg WNF 6221 washing machine combines efficiency, capacity, and advanced technology to provide an excellent laundry solution. Its array of features, including automatic load detection, multiple washing programs, and quiet operation, makes it a valuable addition to any household.
Top Page Image Contents