Majestic Appliances MJ-9000VG owner manual Plumbing Water, Drains, Water Connection

Page 8

Installing/Removing

Getting things ready to install your appliance (continued)

Plumbing - Water, Drains

WATER CONNECTION

1.This appliance can be used with either hot/cold or cold/cold connections.

2.The hoses supplied have either a straight end or an elbow end. The elbow end is meant to connect to the washer. Be sure to connect the hot hose to the hot side of the appliance itself, the cold side to the cold connection. (See picture) The straight end to the 3/4” BSP standard hose bib thread.

3.MAKE SURE WASHERS ARE INSTALLED IN EACH END OF THE SUPPLY HOSES.

4.Ensure that water connections are free from debris or sediment.

6.BRASS PRESSURE REDUCERS MUST BE INSTALLED TO PROTECT COMPONENTS INSIDE THE APPLIANCE.IMPORTANT ! CHECK THREADS ON THE MACHINE, THE BRASS PRESSURE REDUCERS AND THE SUPPLY HOSES TO ENSURE THEY ARE CLEAN. DO NOT USE EXCESSIVE FORCES. TIGHTEN BY HAND. DO NOT USE POWER TOOLS.

Connection of the drain hose to standpipe

•Outlet end of drain hose (See figure 2) must be at least 20” above bottom of washer. Do NOT block top of standpipe closes with tape or other materials. An air break must be provided at the standpipe to avoid siphoning.

•Connect the drain hose to a standpipe (with internal diameter of at least 3.2 cm or 1 1/4” min. diameter) with a minimum carry away volume of 7 gallons. The top of the standpipe must be 20” minimum from the botton of the appliance. Place drain hose for drainage into a sink tub or standpipe, ensuring that there are no kinks or bends. The free end must be at a height of 80 cm (31 1/2”) from the floor,

the hose must be fixed in the appropriate hook on the upper part of the back panel (fig.4)

DO NOT INSERT THE END IF THE DRAIN HOSE MORE THAN 6” INTO THE STANDPIPE. INSERTING MORE MAY CAUSE THE APPLIANCES TO HAVE INSUFFICIENT DRAINAGE.

CORRECT LEVELING OF UNIT IS ESSENTIAL

It is important for the machine to be perfectly level. The angle of inclination on the work surface must not be more than

2 degrees. For this reason the machine is fitted with adjustable feet used for leveling the machine before use. In the case of carpeted flooring, remember to check that the ventilation in the support area is not plugged.

Exhaust Duct Installation

•Check that all ducting is lint free. Secure ducting with clamps or metal tape.

•The exhaust duct must end with an approved exhaust vent hood with swing out dampers or appropriate louvers.

•Flex or rigid metalic ducting is recommended.

•Exhaust duct should be short and straight and slope downwards and away from the appliance. Long exhaust duct runs can increase drying time and collect lint.

IMPORTANT! THE EXHAUST DUCT SHOULD NOT BE INSERTED INTO A CHIMNEY WALL, CEILING OR CONCEALED SPACE OR STRUCTURE.

Majestic LLC © 01/01/2006

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Very Important Read Installation Instructions On Important Safety Instructions Welcome Instant help 9 For best results washingGetting things ready to install your appliance UnpackingInspecting When to Remove Shipping Bolts Brass Pressure RegulatorsRecessed, Closet and Alcove Installations ElectricityPlumbing Water, Drains Water ConnectionFor best results washing Selecting/setting the wash program For best results washingControls, detergent dispenser Economic ButtonType of Fabric Detergent Softener Bleach Selecting Dry Cycles Drying ControlsYou are in control of the drying cycle Size of drying loadTips on Stain RemovalBALLPOINT INKRead here, then call us Washer dryer won’t startMaintenance Tips Remote Locations Warranty Information Extended Warranty InformationAccessories PN 17-1054 Deluxe Chrome Out- side VentMajestic LLC 01/01/2006

MJ-9000V, MJ-9000VG specifications

Majestic Appliances has made a significant leap in the realm of home kitchen technology with the introduction of its MJ-9000VG and MJ-9000V models. These appliances are designed to meet the extensive needs of modern households while marrying high-end innovation with user-friendly features.

The MJ-9000VG stands out for its versatility, offering a wide array of cooking options. This model boasts a powerful 900-watt microwave, which ensures swift and even heating of food. The inclusion of multiple power levels allows for precise adjustments, making it suitable for defrosting, reheating, and even gourmet cooking. Additionally, the MJ-9000VG features smart sensor technology that automatically adjusts cooking times and power levels based on the food being cooked, eliminating the guesswork often associated with microwave cooking.

On the other hand, the MJ-9000V shines with its sleek and compact design, perfect for kitchens with limited counter space. Despite its smaller footprint, this model does not compromise on power or functionality. It offers a robust 800 watts of cooking power and a variety of pre-programmed settings for popular meal types, making it incredibly user-friendly. The MJ-9000V also incorporates an intuitive digital control panel with a bright LED display, providing clear visibility for easy operation.

Both models feature an eco-friendly design, utilizing innovative materials that reduce energy consumption without sacrificing performance. They come with a durable ceramic enamel interior that not only makes cleaning a breeze but also helps to maintain hygienic conditions by preventing microbial growth.

Safety is paramount in kitchen appliances, which is why Majestic Appliances has integrated child safety locks in both models to prevent accidental operation. The MJ-9000VG and MJ-9000V also include a turntable system that ensures even cooking by rotating food during operation.

Furthermore, the sleek design and modern aesthetics of both MJ-9000VG and MJ-9000V make them an attractive addition to any kitchen, blending seamlessly with a variety of décor styles. Overall, these appliances encapsulate a perfect blend of technology, efficiency, and style, making them ideal choices for anyone looking to enhance their culinary experience.
Top Page Image Contents