JVC KS-SB200 manual Mounting JVC PnP, Close the dock holder To remove JVC PnP

Page 6

Preparations

Mounting JVC PnP

Do not connect the AC power cord until all other connections have been made.

IMPORTANT: Make sure to turn the power off of both the unit and JVC PnP when attaching/removing JVC PnP.

Dock holder

1

2

3

Press PUSH on the top of the unit to open the dock holder.

Attach JVC PnP by sliding it down to the dock.

• Press in JVC PnP firmly to the dock.

Close the dock holder.

Note: The internal cooling fan ventilates automatically. Do not close the ventilation slits or the proper ventilation is obstructed.

To remove JVC PnP,

press PUSH on the top of the unit, then pull out JVC PnP by holding the sides of JVC PnP.

Ventilation slits

6

Image 6

Contents KS-SB200 To Reduce the Risk of Electric Shock When the unit is turned off, the power-on lamp goes off Table of contents Supplied AccessoriesConnecting the Antenna PreparationsMounting JVC PnP Close the dock holder To remove JVC PnPClose the battery compartment cover Putting the Batteries into the UnitPress Power on the unit Turn on JVC PnP Connecting the AC power cordTurning on the Power OperationsAdjusting the Volume Listening to auxiliary equipment For private listeningConnect auxiliary equipment to AUX jack on the unit Troubleshooting Speakers SpecificationsAmplifier General With no more than 10% total harmonic distortionCall