Furuno DWF-240M, DWF-200M instruction manual General Procedure for Operation, Optional Step

Page 11

DWF-200/240M(101) 97.1.194:22PM ˘ ` 11

GENERAL PROCEDURE FOR OPERATION

1.Add measured detergent to the washer, (Follow manufacturer’s directions for safe use)

2.OPTIONAL STEP

If desired, add measured liquid chlorine bleach to the bleach inlet, use only liquid chlorine in the bleach inlet

*Follow manufacturer’s direction for safe use.

NOTE

Do not let bleach splash, drip, or run down into washer basket.

Undiluted bleach will damage any fabric it touches.

Do not use this dispenser to add powdered chlorine or color safe bleach to your wash load. The dispenser is for liquid chlorine bleach use only.

3.OPTIONAL STEP

Pour liquid fabric softener into the dispenser using the amount recommended on the package. Avoid dripping or spilling any fabric softener on the load.

Dilute fabric softener with warm water.

Fill dispenser with warm water until liquid reaches the base line in the case. The dispenser is for liquid fabric softener use only. (See page 2)

The liquid fabric softener will be put into the TUB automatically when final Rinse process.

Inlet Hole

Base Line

Detergent

Softener inlet

4.Close the washer lid (door)

5.Press the power button.

6.Select the cycle. The full automatic cycle has four settings; FUZZY, BLANKET, WOOL, LIGHT HEAVY, ECONOMY.(See page 9)

7.Press the START/HOLD button.

11

Image 11
Contents Full-Auto Electric Washing Machine Bleach Inlet Pulsator Control Panel HOT Water TAP Parts and FeaturesRead all instructions before using your washer Washer SafetyLocation of washer Installation in StructionsNon-Pump Model Electrical RequirementsFor Ordinary Tap Inlet Hose ConnectionPreparing clothes for washing Operating Your Washer Functions of the Control Panel Washing Procedure and Course Selection Reserved Washing Guides for Other Useful ProgramsOptional Step General Procedure for OperationCaring for Your Washer Cleaning your washerCleaning the Lint Filter HOW to Clean the FilterRemoving Stains Before calling for service, check these Trouble ShootingModel no Specification