John Lewis JLTDC10 instruction manual Replacing the drum light

Page 22

Displayed programme time changes erratically or stays unchanged for a long time.

Programme inactive, empty water tank warning lamp Full tank lights.

Drying cycle ends shortly after programme starts. END display illuminated.

Drying cycle lasts an unusually long time. Note: After around 5 hours the drying cycle ends automatically (see „Drying cycle complete ”).

Programme time is corrected automatically depending on type and volume of laundry and level of dampness.

The water reservoir is full.

Not enough washing loaded or washing loaded is too dry for selected programme.

Lint filter clogged.

Fluff filter clogged.

Load volume too big.

Laundry insufficiently spun.

Particularly high room temperature. Temporary switching off of the compressor to avoid overload.

Automatic process; this is not a machine fault.

Empty the water reservoir, then start programme with Start/ Pause button.

Select time programme or higher drying level (e.g. INTENSIVE DRY instead of STORAGE DRY).

Clean lint filter.

Clean fluff filter.

Reduce load volume.

Laundry must be adequately spun.

Automatic process, there is no fault with the appliance. If possible, lower the room temperature.

Replacing the drum light

Only use a special bulb which is designed specially for dryers. The special bulb can be obtained from your local Service Force Centre.

Important! When the appliance is switched on, the interior lighting switches itself off after 4 minutes when the door is open.

Warning! Do not use standard bulbs! These develop too much heat and may damage the machine!

Warning! Before replacing the bulb, disconnect the mains plug; with a permanent connection: fully unscrew or deactivate the fuse.

1.Unscrew the cover above the bulb (this can be found directly behind the loading aperture, at the top; refer to “Description of machine” section.)

2.Replace the defective bulb.

3.Screw cover back down.

Check the correct positioning of o-ring gasket before screwing back the door light cover. Do not operate the dryer when missing o-ring gasket on door light cover.

Warning! For safety reasons, the cover must be screwed down tightly. If this is not done, the dryer must not be operated.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Condenser dryer with heat pump Important safety information General safetyInstallation UseEnvironmental tips Child safetyEnvironmental information Page Contents Description of the appliance Control panel Start/Pause button Full tank Delay start buttonBefore first use Programme chart ProgrammesRefresh Wool Silk Daily use Switching machine onSorting and preparing laundry Door opening and laundry loadingSelecting the programme Extra delicateIntensive Long anti-crease AlarmTime Starting the programme Delay startSetting child lock Changing programmeSignal sounds intermittently for about one minute Drying cycle complete / removing laundryMaintenance and cleaning Cleaning fluff filterClean the entire filter area Cleaning the door sealEmptying the water reservoir Cleaning heat exchanger filter Pull the filter housing out of the base by Handle Clean operating screen and housing Cleaning the drumDo not use any sharp objects in this area What to do if Possible causeReplacing the drum light Alarm permanent on/off Machine settingsAdjusting the level of conductivity Technical specifications Consumption valuesTransporting the appliance InstallationAppliance positioning Removing transport safety packaging Electrical connectionDoor reversal Proceed as followsSpare parts Repairs after sales service0870 010 Page Page Page 136904440-02-07042008

JLTDC10 specifications

The John Lewis JLTDC10 is a top-of-the-line tumble dryer that combines superior technology with user-friendly features, making it a sought-after appliance for modern households. Designed to cater to diverse laundry needs, it stands out with its robust build and efficient performance.

One of the main features of the JLTDC10 is its large capacity drum, which can accommodate up to 10 kg of laundry. This is perfect for families or those who frequently do large loads, allowing for more clothes to be dried in a single cycle. The stainless steel drum is not only durable but also designed to be gentle on fabrics, ensuring that clothes come out looking fresh and feel soft.

The dryer utilizes advanced heat pump technology, which is highly energy-efficient. Unlike traditional condenser dryers, heat pump dryers recycle the hot air produced during the drying process, resulting in lower electricity consumption. The JLTDC10 boasts an impressive energy rating, thus contributing to significant savings on energy bills over time.

Another standout characteristic of the JLTDC10 is its wide range of drying programs. The appliance includes specific settings for various fabric types, such as cotton, synthetics, and delicate items. This ensures optimal drying while reducing the risk of damage to garments. Additionally, the machine offers a timed drying program for those who prefer manual control over the drying process.

The machine is also equipped with an intuitive LED display that simplifies operation. Users can easily navigate through the various settings and check the drying progress at a glance. The delay start function is another convenient feature, allowing users to set a cycle to begin at a later time, making it easier to manage laundry around busy schedules.

Safety features are also prioritized in the design of the JLTDC10. It includes an auto shut-off function that activates when drying is complete or if the door is unintentionally left open, providing peace of mind to users.

Overall, the John Lewis JLTDC10 is a cleverly designed and feature-rich tumble dryer that addresses both performance and user convenience, making it an ideal choice for anyone looking to streamline their laundry process while ensuring the longevity of their clothing.
Top Page Image Contents