TIMER button
LED multi function display
8
Control Panel and Display
Lets you program a wash to finish up to 24 hours later. The 
symbol is shown on the display.
Child lock: To prevent accidental operation by children, this disables the operation buttons and dial, and also locks the door. Press the TIMER button for 3 seconds to activate this option. The 
symbol is shown on the display. Press TIMER button for 3 seconds again to cancel the child lock. (Remaining time of timer operation is shown instantaneously but disappears after the child lock is set.)
Displays all cycle information, remaining time and error codes.
Water temperature
The 
symbol is on when the heater is off (Cold setting). Spin speed
●
(No Spin) : Final spin is cancelled and last rinse water is drained only.
●
(Rinse Hold) : Final spin is cancelled and water is not drained, so the laundry remains in the last rinse water.
●
Symbol is on when the spin speed from 400 to 1200 r/min is selected.
QUICK option
INTENSIVE option
PREWASH option
EXTRA RINSE option
Child lock option
All buttons are disabled except the POWER button and Jog Dial, and
the door is locked when the |
| symbol is on. |
Door lock |
|
|
The door is locked when the |
| symbol is on. |
|
TIMER option
Remaining time of the program (shows ‘TIME LEFT’), remaining time until timer operation is completed (shows ‘h’), and error codes.
Page 21 : Error Codes