Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Recommended Grounding Method

This compactor is for use on a single phase, 115-volt, 60 Hz, AC only 15- or 20-amp fused and properly grounded circuit and is equipped with a grounding plug as shown below. It is recommended that a separate circuit serving only this appliance be provided.

This compactor must be grounded while in use to reduce the risk of electric shock. The compactor is equipped with a three- conductor cord and 3 prong grounding-type plug to fit the proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Do not connect the green (or green and yellow) wire to a live terminal.

UndercounterInstallation

NOTE: Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the personal responsibility and obligation of the customer to contact a qualified installer to assure that electrical installation meets all National and Local codes and ordinances.

Tools needed:

Gather the required tools and parts before starting installation.

■	Level	■ Phillips No. 2 screwdriver
■	Tape measure	■	Flat-blade screwdriver
■	Pliers	■	⁵⁄₁₆" Hex-head socket wrench
■	Scissors	■	Utility knife

IMPORTANT:

■Do not grasp control panel to move compactor.

■Slide compactor onto cardboard or hardboard before moving compactor across floor to avoid floor covering damage.

■Do not allow the rear frame of the compactor to touch the floor covering when lifting or moving compactor.

Undercounter Installation

NOTE: Installation hardware is not provided with full cabinet models.

1.Measure the height of your cabinet opening. The top of the compactor should be at least ¹₈ " (3 mm) from the top of the cabinet opening.

The rear wheels are preset for a cabinet opening height of 34¹⁄₄" (87 cm) (Position 1).

To adjust for other cabinet opening heights:

■Loosen self-tapping screw just enough to clear stud from hole in position “1.”

■Move the rear wheel and stud to position “2” or “3” as needed for your cabinet opening measurement: Position 2: 34¹⁄₄" to 34⁷⁄₁₆" (87 to 87.5 cm)

Position 3: 34⁷⁄₁₆" to 34⁵⁄₈" (87.5 to 88 cm)

NOTE: To level the unit in position 3, you may need to add shims under the leveling legs.

■Tighten screw. Repeat for other rear wheel.

	D
A. Wheel bracket assembly	C. Locating stud
B. Cabinet	D. Self-tapping screw (pivot)

INTEGRATED COMPACTOR specifications

The KitchenAid Integrated Compactor is a versatile and innovative appliance designed to streamline waste management in the kitchen. This compact yet powerful device offers a modern solution for households seeking to reduce clutter and improve efficiency. With its sleek design, the compactor seamlessly integrates into cabinetry, maintaining the aesthetic appeal of any kitchen while providing convenience at your fingertips.

One of the standout features of the KitchenAid Integrated Compactor is its powerful compression capability. It boasts a strong motor that compresses waste by up to 75%, significantly reducing the volume of trash generated. This means fewer trips to the outdoor garbage bin and a more organized kitchen environment. The compactor accommodates various types of waste, including food scraps, packaging, and other refuse, making it an essential addition for any kitchen.

The user-friendly controls of the KitchenAid Integrated Compactor make it easy to operate. With a simple push of a button, users can activate the compaction cycle, which runs quietly and efficiently. The compactor also includes an automatic start feature, ensuring it operates when the door is closed, adding to its ease of use.

Moreover, this integrated compactor is designed with advanced safety features. The door is equipped with a child lock mechanism, preventing accidental opening and ensuring the safety of busy kitchens. The design also includes a clean touch control panel, which is easy to wipe down and maintain, providing an added layer of hygiene.

In terms of design and finish, the KitchenAid Integrated Compactor is available in various colors and styles to match different kitchen decors. Its built-in installation allows it to blend seamlessly with surrounding cabinetry, making it a perfect fit for modern homes.

Additionally, the appliance is engineered for efficiency, with energy-saving features that allow it to consume less power while providing exceptional performance. The compactor also features a filter system that reduces odors, keeping your kitchen smelling fresh.

In conclusion, the KitchenAid Integrated Compactor is a perfect marriage of functionality and aesthetics. It offers a space-saving solution for waste management, advanced technologies that ensure effective operation, and a sleek design that enhances any kitchen's look. With its array of features and emphasis on ease of use and safety, this compactor is an invaluable asset for today's eco-conscious households.