John Lewis JLWM1405 instruction manual Unpacking, Positioning, Installation on a Suspended Floor

Page 7

Unpacking

Warning ! Slide out the polythene bag containing the polystyrene block before using the

appliance. Pull off adhesive strips from inside machine on top of drum.

Keep all packaging away from children

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

5.Set the machine upright and remove the remaining rear screw. Slide out the relevant pin.

6.Plug all the holes with the plugs which you will find in the envelope containing the instruction manual.

P1129

P0001

Important !

You are advised to keep all the packaging for re- use in case the machine is to be transported again. In case of moving out the same precautions as per paragraph “The dangers of freezing” must be taken i.e. the residual water in the hoses must be pumped out.

1.Using a spanner, unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor

Keep all packaging away from children

Positioning

Install the machine on a flat hard floor.

1

2

3

P1123

P1126

Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units.

Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Your new washing machine has been designed to be permanently plumbed in to your home’s water supply and drainage system. However, if this is not possible, it

2.Remove the polystyrene block(s) from the bottom of the machine and release the two plastic bags.

3.Very carefully slide out the left polythene bag, removing it towards the right and then downwards.

P1127

4.Very carefully slide out the right polythene bag, removing it towards the left and then upwards. Remove the bottom cover found inside the drum of your appliance, lay it’s hook as the arrow ’A’ indicates and push the top of the cover to seal it closed.

may be connected to suitable existing tap with the drain hose discharging into a sink.

The appliance has one inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumber merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents JLWM1405 Spin washing machine Service InstallationChild Safety Maintenance and CleaningMachine works more economically if it is fully loaded Materials marked with the symbol are recyclableEcological hints Environment InformationContents Detergent dispenser drawer Door lock IndicatorChild safety feature Description of the ApplianceInstallation Keep all packaging away from children Installation on a Suspended FloorUnpacking PositioningWater drainage Water inletInto a drainage standpipe Onto a sink outlet spigot LevellingSpecial conditions Interest of the environmentPermanent connection Electrical ConnectionExtra rinse button Control PanelDetergent dispenser drawer Programme selector dial Spin buttonPrewash button Delay Start buttonQuick button Easy Iron buttonStart / Pause button Stain buttonDisplay Your washing machine and are easy to resolve Washing phasesDelayed start Option selectionProgramme information Child lock Special FeaturesBuzzer Select the desired options Load the laundrySelect the spin speed or «0» No spin option Measure out the detergentEnd of programme Select the Delay startHow to Interrupt a programme Start the programmeBath robe Hints and Tips on WashingImportant Notes Wash Care SymbolsWool Washing programmesType of laundry FabricsDescription Off ResetProgramme Load Type of laundryMaintenance and Cleaning Screw the pump cover fully Close the pump door Cleaning the water inlet filterEmergency emptying out Remove any objects from the pump impeller by rotating it«No incoming water» «Close the door» door openMachine does not start up Machine does not fillNo water is visible in the drum Machine vibrates when spinningDoor will not open Machine makes an unusual noise0870 01 03/06

JLWM1405 specifications

The John Lewis JLWM1405 is a modern washing machine that combines efficiency, technology, and user-friendly features, making it an attractive choice for households seeking reliability and performance. With a load capacity of 8 kg, it is designed to cater to the needs of medium to large families, allowing you to wash multiple items in a single load. This ensures that laundry days are not only manageable but also less time-consuming.

One of the standout features of the JLWM1405 is its energy efficiency. With an A+++ energy rating, this washing machine is designed to minimize electricity consumption without compromising on wash performance. This not only helps in reducing your utility bills but is also an environmentally friendly choice, contributing positively to the ecosystem by lowering your carbon footprint.

The JLWM1405 incorporates advanced washing technologies, including a range of specialized wash programs tailored to different fabric types and soiling levels. From cottons to synthetics and even delicate items, the washing machine offers tailored cycles that optimize water and energy usage while safeguarding your clothes. Additionally, the machine features a quick wash function, which is particularly useful for those who need to freshen up garments in a hurry.

Another notable aspect of the John Lewis JLWM1405 is its inverter motor. This advanced motor technology ensures quieter operation and improved energy efficiency. It not only enhances the machine’s performance but also leads to longer-lasting durability, making it a wise investment for your home.

The user interface is designed with ease of use in mind, featuring a digital display and intuitive controls that allow for straightforward operation. You can easily select your desired wash program, set the spin speed, and adjust the temperature according to your laundry needs.

In terms of safety and convenience, the JLWM1405 comes equipped with various features such as child lock, overflow protection, and an out-of-balance detection system. This ensures a hassle-free laundry experience while providing peace of mind for families with young children.

Overall, the John Lewis JLWM1405 washing machine represents a perfect blend of innovation and practicality, making it an excellent addition to any modern household. With its combination of capacity, efficiency, and advanced features, it stands out as a reliable choice for daily laundry needs.
Top Page Image Contents